CS5530A datasheet(72/259 Pages) NSC

72 / 259 page

www.national.com

Revision 1.1

Functional Description (Continued)

Although not considered as device idle timers, two addi-

tional timers are provided by the CS5530A. The Video Idle

Timer used for Suspend determination and the VGA Timer

used for SoftVGA.

These timers and their associated programming bits are

listed in Tables 3-26 and 3-27.

Table 3-26. Video Idle Timer and Trap Related Registers

Bit

Description

F0 Index 81h

Power Management Enable Register 2 (R/W)

Reset Value = 00h

Video Access Idle Timer Enable: Load timer from Video Idle Timer Count Register (F0 Index A6h) and generate an SMI

when the timer expires. 0 = Disable; 1 = Enable.

If an access occurs in the video address range (sets bit 0 of the GX-series processor’s PSERIAL register) the timer is

reloaded with the programmed count.

Top level SMI status is reported at F1BAR+Memory Offset 00h/02h[0].

Second level SMI status is reported at F0 Index 85h/F5h[7].

F0 Index 82h

Power Management Enable Register 3 (R/W)

Reset Value = 00h

Video Access Trap: 0 = Disable; 1 = Enable.

If this bit is enabled and an access occurs in the video address range (sets bit 0 of the GX-series processor’s PSERIAL

Top level SMI status is reported at F1BAR+Memory Offset 00h/02h[0].

Second level SMI status is reported at F0 Index 86h/F6h[7].

F0 Index A6h-A7h

Video Idle Timer Count Register (R/W)

Reset Value = 0000h

15:0

Video Idle Timer Count: The idle timer loaded from this register determines when the graphics subsystem has been idle as

part of the Suspend determination algorithm. The 16-bit value programmed here represents the period of video inactivity

after which the system is alerted via an SMI. The count in this timer is automatically reset whenever an access occurs to the

graphics controller space. The timer uses a 1 second timebase.

In a GX-series processor based system the graphics controller is embedded in the CPU, so video activity is communicated

to the CS5530A via the serial connection (PSERIAL register, bit 0) from the processor. The CS5530A also detects accesses

to standard VGA space on PCI (3Bxh, 3Cxh, 3Dxh and A000h-B7FFh) in the event an external VGA controller is being used.

To enable this timer set F0 Index 81h[7] = 1.

Top level SMI status is reported at F1BAR+Memory Offset 00h/02h[0].

Second level SMI status is reported at F0 Index 85h/F5h[7].

Table 3-27. VGA Timer Related Registers

Bit

Description

F0 Index 83h

Power Management Enable Register 4 (R/W)

Reset Value = 00h

VGA Timer Enable: Turn on VGA Timer and generate an SMI when the timer reaches 0. 0 = Disable; 1 = Enable.

VGA Timer programming is at F0 Index 8Eh and F0 Index 8Bh[6].

To reload the count in the VGA timer, disable it, optionally change the count value in F0 Index 8Eh[7:0], and reenable it

before enabling power management.

SMI Status reporting is at F1BAR+Memory Offset 00h/02h[6] (only).

Although grouped with the power management Idle Timers, the VGA Timer is not a power management function. The VGA

Timer counts whether power management is enabled or disabled.

F0 Index 8Bh

General Purpose Timer 2 Control Register (R/W)

Reset Value = 00h

VGA Timer Base: Selects timebase for VGA Timer Register (F0 Index 8Eh). 0 = 1 ms; 1 = 32 µs.

F0 Index 8Eh

VGA Timer Count Register

7:0

VGA Timer Load Value: This register holds the load value for the VGA timer. The value is loaded into the timer when the

timer is enabled (F0 Index 83h[3] = 1). The timer is decremented with each clock of the configured timebase (F0 Index

8Bh[6]). Upon expiration of the timer, an SMI is generated and the status is reported in F1BAR+Memory Offset 00h/02h[6]

(only). Once expired, this timer must be re-initialized by disabling it (F0 Index 83h[3] = 0) and then enabling it (F0 Index

83h[3] = 1). When the count value is changed in this register, the timer must be re-initialized in order for the new value to be

loaded.

This timer’s timebase is selectable as 1 ms (default) or 32 µs. (F0 Index 8Bh).

Note: Although grouped with the power management Idle Timers, the VGA Timer is not a power management function. It is

not affected by the Global Power Management Enable setting at F0 Index 80h[0].

CS5530A датащи(PDF) 72 Page - National Semiconductor (TI)

CS5530A датащи(HTML) 72 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL