RIVA128 datasheet(28/77 Pages) STMICROELECTRONICS

номер детали	RIVA128

подробное описание детали	RIVA 128™ 128-BIT 3D MULTIMEDIA ACCELERATOR

PDF	77 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

28 / 77 page

128-BIT 3D MULTIMEDIA ACCELERATOR

RIVA 128

28/77

SGRAM FRAMEBUFFER INTERFACE

The RIVA 128 SGRAM interface can be configured with a 2MByte 64-bit or 4MByte 128-bit data bus. With

a 128-bit bus, 4MBytes of SGRAM is supported as shown in Figure 22. All of the SGRAM signalling envi-

ronment is 3.3V.

Figure 22.

64-bit 2MByte and 128-bit 4MByte SGRAM configurations

Read and write accesses to SGRAM are burst oriented. SGRAM commands supported by the RIVA 128

are shown in Table 5. Initialization of the memory devices is performed in the standard SGRAM manner

as described in Section 6.1. Access sequences begin with an Active command followed by a Read or Write

command. The address bits registered coincident with the Read or Write command are used to select the

starting column location for the burst access. The RIVA 128 always uses a burst length of one and can

launch a new read or write on every cycle.

SGRAM has a fully synchronous interface with all signals registered on the positive edge of FBCLKx. Mul-

tiple clock outputs allow reductions in signal loading and more accuracy in data sampling at high frequen-

cy. The clock signals can be interspersed as shown in Figure 23, page 29 for optimal loading with either

2 or 4MBytes. The I/O timings relative to FBCLKx are shown in Figure 25, page 31.

RIVA 128

256K

x32

256K

x32

FBD[31:0]

FBD[63:32]

256K

x32

FBD[95:64]

256K

x32

FBD[127:96]

Expansion to

4MBytes

RIVA128 датащи(PDF) 28 Page - STMicroelectronics