301020013 datasheet(8/109 Pages) AMSOSRAM

8 / 109 page

Dragster

Pin assignment

Datasheet • PUBLIC • Document Feedback

DS000444 • v5-00 • 2025-Aug-29

8 / 109

Pin assignment

3.1

Pin diagram

The available packages are organized into two main types: LCC Ceramic and INVAR. The

LCC is a no lead package where the silicon's carrier is ceramic while the INVAR package uses

a special nickel-iron alloy as heat dissipation and mechanical reference. While the LCC

Ceramic package is oriented for size, resolution and cost conscious applications, the INVAR

type is focused on high performance and robustness, where highest speed and high

resolutions are the main advantages to the field application. All package types take a cover

glass (anti-reflective coating) over sensor's silicon to protect from external dust particles.

For the customer, one of the most obvious advantages of Dragster packages is the use of

commercially available INVAR connectors or low cost LCC Ceramic connections. This makes

each camera development fast, easy and also brings other advantages: precise mechanical

alignment to the optics by taking INVAR as reference and its CNC machined features,

integrated heat dissipation plate that minimizes sensor stress in z-axis, maximization of sensor

performance in speed and noise and customizable package to suit any requirement. The LCC

Ceramic can also be mounted as a SMD part.

Dragster INVAR modules have up to four Molex connectors with 120-pin and reference

5010171203. On the camera side the matching part is 546841204.

Figure 3: Pin numbering of DR16K3.5 and DR2x8K7 (back view)

Connector 4

Connector 2

Connector 3

Connector 1

120

301020013 датащи(PDF) 8 Page - ams-OSRAM AG