| поискавой системы для электроныых деталей |
|
301020013 датащи(PDF) 50 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
301020013 датащи(HTML) 50 Page - ams-OSRAM AG |
|
50 / 109 page ![]() Dragster Register description Datasheet • PUBLIC • Document Feedback DS000444 • v5-00 • 2025-Aug-29 50 / 109 / 9.1.2 Control register 2 (Address 0x02) Table 18: Control register 2 Address: 0x02 Default value: 0x12 Access: Read/Write Bit Bit name Default value Bit description 7:6 N/A 00b Not used 5:5 Analogue Gain 0b Set to '0' – No analogue gain (x1) in the CDS. Set to '1' – Analogue gain (x4) in the CDS. 4:4 Enable White Clamping (Anti-Corona) 1b Set to '0' – The white clamp is not active. Set to '1' – The clamping of white values set. White clamp is used to avoid contrast inversion of heavily over exposed scenes (corona effect) 3:3 Enable Anti-Blooming(1) 0b Set to '0' – Additional anti blooming feature OFF. Set to '1' – Additional anti blooming feature ON. 2:2 White Offset(2) 0b Set to '0' – Not active, values of the A/D conversion go to the readout registers. Set to '1' – When active, a new value is written to the offset registers. 1:1 Enable Control VRef 1b Set to '0' – VRef buffer bias is in constant power mode. Set to '1' – VRef buffer bias in low power mode (recommended). 0:0 Auto Gen Load Pulse 0b Set to '0' – The pulse for readout has to be provided externally. Set to '1' – The pulse for readout is generated internally, immediately after completed AD conversion and once the LVAL of the previous line readout is back to zero. Multiple readouts of the same data occur if no new A/D conversion has been started after finalization of the line readout. (1) The pixels inherent anti-blooming structures will under normal conditions prevent any kind of blooming. Only under the most extreme over exposure condition, this additional anti-blooming circuitry may be required. (2) Feature related to digital subtraction, which is not recommended to be set to ‘1’. Still, if using this feature, the bit 2 in Control Register 3 (register 0x05) "Enable Offset SRAM" must be set to ‘1’, at user’s responsibility. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |