SPC563M60L7 datasheet(37/128 Pages) STMICROELECTRONICS

37 / 128 page

DocID14642 Rev 12

37/128

SPC563M64x, SPC563M60x

Overview

127

Note:

In the calibration tool package, the full Nexus Auxiliary port shares balls with the addresses

of the calibration bus. Therefore multiplexed address/data bus mode must be used for the

calibration bus when using full width Nexus trace in calibration tool assembly.

The following features are implemented:



5-pin JTAG port (JCOMP, TDI, TDO, TMS, and TCK)

–

Always available in production package

–

Supports both JTAG Boundary Scan and debug modes

–

3.3 V interface

–

Supports Nexus class 1 features

–

Supports Nexus class 3 read/write feature



9-pin Reduced Port interface in LQFP144 production package

–

Alternate function as IO

–

5 V (in GPIO or alternate function mode), 3.3 V (in Nexus mode) interface

–

Auxiliary Output port

– 1 MCKO (message clock out) pin

– 4 MDO (message data out) pins

– 2 MSEO (message start/end out) pins

– 1 EVTO (event out) pin

–

Auxiliary input port

– 1 EVTI (event in) pin



17-pin Full Port interface in calibration package used on calibration tool boards

–

3.3 V interface

–

Auxiliary Output port

– 1 MCKO (message clock out) pin

– 4 (reduced port mode) or 12 (full port mode) MDO (message data out) pins;

8 extra full port pins shared with calibration bus

– 2 MSEO (message start/end out) pins

– 1 EVTO (event out) pin

–

Auxiliary input port

– 1 EVTI (event in) pin



Host processor (e200) development support features

–

IEEE-ISTO 5001-2003 standard class 2 compliant

–

Program trace via branch trace messaging (BTM). Branch trace messaging

displays program flow discontinuities (direct branches, indirect branches,

exceptions, etc.), allowing the development tool to interpolate what transpires

between the discontinuities. Thus, static code may be traced.

–

Watchpoint trigger enable of program trace messaging

–

Data Value Breakpoints (JTAG feature of the e200z335 core): allows CPU to be

halted when the CPU writes a specific value to a memory location

– 4 data value breakpoints

–CPU only

– Detects ‘equal’ and ‘not equal’

– Byte, half word, word (naturally aligned)

SPC563M60L7 датащи(PDF) 37 Page - STMicroelectronics

SPC563M60L7 датащи(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL