PM7366-PI datasheet(21/286 Pages) PMC

21 / 286 page

RELEASED

PM7366 FREEDM-8

DATA SHEET

PMC-1970930

ISSUE 4

FRAME ENGINE AND DATA LINK MANAGER

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA,INC., AND FOR ITS CUSTOMERS’ INTERNAL USE

(combined opening and closing flag). Zeros between flags are not shared. PCI bus latency may

cause one or more channels to underflow, in which case, the packets are aborted, and the host is

notified. For normal traffic, an abort sequence is generated, followed by inter-frame time fill

characters (flags or all-ones bytes) until a new packet is sourced from the PCI host. No attempt is

made to automatically re-transmit an aborted packet.

Alternatively, in the transmit direction, the FREEDM-8 supports a transparent operating mode. For

each provisioned transparent channel, the FREEDM-8 directly inserts the transmitted octets from

host memory. If the transparent channel is assigned to a channelised link, then the octets are

aligned to the transmitted time-slots. If a channel underflows due to excessive PCI bus latency,

an abort sequence is generated, followed by inter-frame time fill characters (flags or all-ones

bytes) to indicate idle channel. Data resumes immediately when the FREEDM-8 receives new

data from the host.

The FREEDM-8 is configured, controlled and monitored using the PCI bus interface. The

FREEDM-8 is implemented in low power CMOS technology, with TTL compatible inputs and

outputs. The FREEDM-8 is available in two package options; a 256 pin enhanced ball grid array

(SBGA) package, or a 272 pin plastic ball grid array (PBGA) package.

PM7366-PI датащи(PDF) 21 Page - PMC-Sierra, Inc