FALXT972MCCA4 datasheet(19/92 Pages) INTEL

19 / 92 page

Intel

® LXT972M Single-Port 10/100 Mbps PHY Transceiver

Datasheet

Document Number: 302875-005

Revision Date: 27-Oct-2005

Table 9 lists signal descriptions of the LXT972M Transceiver power, ground, and no-connect pins.

Table 10 lists signal descriptions of LXT972M Transceiver Joint Test Action Group (JTAG) pins.

Note:

If a JTAG port is not used, these pins do not need to be terminated.

Table 9.

Intel® LXT972M Transceiver Power, Ground, No-Connect Signal Descriptions

LQFP

Pin#

Symbol

Type

Signal Description

GNDA

–

Analog Ground.

5, 9, 24,

25, 30,

GND

–

Ground Input/Output.

Ground return for digital I/O circuits (VCCIO).

6, 29

VCCIO

–

MII Power.

Requires either a 3.3 V or a 2.5 V supply. Must be supplied

from the same source used to power the MAC on the other

side of the MII.

For the LXT972M Transceiver, VCCIO is 3.3 V.

VCCA

–

Analog Power.

Requires a 3.3 V power supply.

VCCD

–

Digital Power.

Requires a 3.3 V power supply.

7, 8

–

No Connection.

These pins are not used and must not be terminated.

Table 10. Intel

® LXT972M Transceiver JTAG Test Signal Descriptions

LQFP

Pin#

Symbol

Type

Signal Description

TDI

Test Data Input.

Test data sampled with respect to the rising edge of TCK.

TDO

Test Data Output.

Test data driven with respect to the falling edge of TCK.

TMS

Test Mode Select.

TCK

Test Clock.

Clock input for boundary scan.

TRST_L

Test Reset.

This active-low test reset input is sourced by ATE.

FALXT972MCCA4 датащи(PDF) 19 Page - Intel Corporation

FALXT972MCCA4 датащи(HTML) 19 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

датащи скачать

ссылки URL