ADPD107 datasheet(60/66 Pages) AD

60 / 66 page

ADPD105/ADPD106/ADPD107

Data Sheet

Rev. A | Page 60 of 66

Address

Data

Bit

Default

Access

Name

Description

0x06

[15:14]

0x0

R/W

Reserved

Write 0x0.

[13:8]

0x00

R/W

FIFO_THRESH

FIFO length threshold. An interrupt is generated when the number of

data-words in the FIFO exceeds the value in FIFO_THRESH. The interrupt

pin automatically deasserts when the number of data-words available

in the FIFO no longer exceeds the value in FIFO_THRESH.

[7:0]

0x00

R/W

Reserved

Write 0x00.

0x08

[15:8]

0x04

REV_NUM

Revision number.

[7:0]

0x16

DEV_ID

Device ID.

0x09

[15:8]

0x00

ADDRESS_WRITE_KEY

Write 0xAD when writing to SLAVE_ADDRESS. Otherwise, do not access.

[7:1]

0x64

R/W

SLAVE_ADDRESS

I2C slave address.

0x0

Reserved

Do not access.

0x0A

[15:12]

0x0

Reserved

Write 0x0.

[11:0]

0x000

CLK_RATIO

When the CLK32M_CAL_EN bit (Register 0x50, Bit 5) is set, the device

calculates the number of 32 MHz clock cycles in two cycles of the 32 kHz

clock. The result, nominally 2000 (0x07D0), is stored in the CLK_RATIO bits.

0x0B

[15:13]

0x0

R/W

Reserved

Write 0x0.

[12:8]

0x00

R/W

GPIO1_ALT_CFG

Alternate configuration for the GPIO1 pin.

0x0: GPIO1 is backward compatible to the ADPD103 PDSO pin

functionality.

0x1: interrupt function provided on GPIO1, as defined in Register 0x01.

0x2: asserts at the start of the first time slot, deasserts at end of last

time slot.

0x5: Time Slot A pulse output.

0x6: Time Slot B pulse output.

0x7: pulse output of both time slots.

0xC: output data cycle occurred for Time Slot A.

0xD: output data cycle occurred for Time Slot B.

0xE: output data cycle occurred.

0xF: toggles on every sample, which provides a signal at half the

sampling rate.

0x10: ouput = 0

0x11: output = 1

0x13: 32 kHz oscillator output.

Remaining settings are not supported.

[7:5]

0x0

R/W

Reserved

Write 0x0.

[4:0]

0x00

R/W

GPIO0_ALT_CFG

Alternate configuration for the GPIO0 pin.

0x0: GPIO0 is backward compatible to the ADPD103 INT pin functionality.

0x1: interrupt function provided on GPIO0, as defined in Register 0x01.

0x2: asserts at the start of the first time slot, deasserts at end of last

time slot.

0x5: Time Slot A pulse output.

0x6: Time Slot B pulse output.

0x7: pulse output of both time slots.

0xC: output data cycle occurred for Time Slot A.

0xD: output data cycle occurred for Time Slot B.

0xE: output data cycle occurred.

0xF: toggles on every sample, which provides a signal at half the

sampling rate.

0x10: output = 0.

0x11: output = 1.

0x13: 32 kHz oscillator output.

Remaining settings are not supported.

ADPD107 датащи(PDF) 60 Page - Analog Devices

ADPD107 датащи(HTML) 60 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

датащи скачать

ссылки URL