MPC7450EC datasheet(49/52 Pages) MOTOROLA

49 / 52 page

MOTOROLA

MPC7450 RISC Microprocessor Hardware Speciﬁcations

Ordering Information

1.11 Ordering Information

Ordering information for the parts fully covered by this speciﬁcation document is provided in

Section 1.11.1, “Part Numbers Fully Addressed by This Document.” Section 1.11.2, “Part Numbers Not

Fully Addressed by This Document,” lists the part numbers which do not fully conform to the speciﬁcations

of this document. These special part numbers require an additional document called a part number

speciﬁcation.

1.11.1 Part Numbers Fully Addressed by This Document

Table 20 provides the Motorola part numbering nomenclature for the MPC7450. Note that the individual

part numbers correspond to a maximum processor core frequency. For available frequencies, contact your

local Motorola sales ofﬁce. In addition to the processor frequency, the part numbering scheme also includes

an application modiﬁer which may specify special application conditions. Each part number also contains

a revision level code which refers to the die mask revision number.

Rev 4

Updated document template.

Changed “Full-on Mode” to “Full-Power Mode” and “Sleep - PLL disabled” to “Deep Sleep

Mode” in Table 7 to be consistent with User’s Manual.

Removed specifcation for Doze mode power since this is not tested (see Table 7, Note 4).

Removed Deep Sleep Mode-Max power speciﬁcation since this is not tested.

Revised Figure 23 and removed Table 23 (information is now included in ﬁgure).

Revised format and content of Section 1.11, “Ordering Information.”

Removed rows for unsupported core frequencies from Table 17.

Table 20. Part Numbering Nomenclature

XPC

7450

nnn

Product

Code

Part

Identiﬁer

Package

Processor

Frequency1

Application Modiﬁer

Revision Level

XPC2

7450

RX = CBGA

533

600

667

L: 1.6 to 1.8 V ± 50 mV

0 to 105

°C

E: 2.1; PVR = 8000 0201

Notes:

1. Processor core frequencies supported by parts addressed by this speciﬁcation only. Parts addressed by Part

Number Speciﬁcations may support other maximum core frequencies.

2. The X preﬁx in a Motorola part number designates a “Pilot Production Prototype” as deﬁned by Motorola SOP

3-13. These are from a limited production volume of prototypes manufactured, tested, and Q.A. inspected on a

qualiﬁed technology to simulate normal production. These parts have only preliminary reliability and

characterization data. Before pilot production prototypes may be shipped, written authorization from the customer

must be on ﬁle in the applicable sales ofﬁce acknowledging the qualiﬁcation status and the fact that product

changes may still occur while shipping pilot production prototypes.

Table 19. Document Revision History (continued)

Document Revision

Substantive Change(s)

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

IVE

D B

Y F

INC

MPC7450EC датащи(PDF) 49 Page - Motorola, Inc

MPC7450EC датащи(HTML) 49 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

датащи скачать

ссылки URL