| поискавой системы для электроныых деталей |
|
UCS2112 датащи(PDF) 43 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS2112 датащи(HTML) 43 Page - Microchip Technology |
|
43 / 64 page ![]() 2015 Microchip Technology Inc. DS20005424B-page 43 UCS2112 REGISTER 9-5: GENERAL STATUS 1 REGISTER (ADDRESS 0FH) R/C-0 U-x U-x R-0 R-0 R/C-0 R/C-0 R-0 RATION1 — — CC_MODE1 PWR_EN1_CON LOW_CUR1 REM1 ADET1 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit C = Clear on Read -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 7 RATION1: Indicates the state of Port 1 Rationing. This bit is cleared when read, or cleared automatically when the RATION_RST1 bit is set or the RATION_EN1 bit is cleared. 1 = Port 1 has delivered the programmed mAh of current 0 = Port 1 has not delivered the programmed mAh of current bit 6-5 Unimplemented bit 4 CC_MODE1: Indicates whether Port 1 has entered CC mode. 1 = Port 1 is in CC mode 0 = Port 1 not in CC mode bit 3 PWR_EN1_CON: Reflects the PWR_EN control state. This bit is set and cleared automatically with the logic expression (PWR_EN1 pin OR PWR_EN1S). 1 = Port 1 Power Enable is set 0 = Port 1 Power Enable is clear bit 2 LOW_CUR1: Indicates if the portable device charge current is below the 13.3 mA threshold on the VBUS1 and may be finished charging. This bit is cleared when read and will cause the ALERT#1 pin to be asserted if the ALERT_LINK1 bit is set. 1 = Port 1 charging current less than threshold 0 = Port 1 charging current above threshold bit 1 REM1: Removal Detection Port1 - Indicates if a Removal Detection event has occurred and there is no longer a portable device present on the VBUS1 pin. This bit is cleared when read and will not cause the ALERT#1 pin to be asserted. 1 = Removal Detection occurred 0 = No Removal Detection bit 0 ADET1: Attach Detection Port1 - Indicates that an Attach Detection event has occurred on the VBUS1 pins and there is a new portable device present. Asserts the A_DET#1 pin. This bit is set and cleared as the A_DET#1 pin changes. 1 = Attach Detection event has occurred. A_DET#1 pin asserted 0 = No Attach Detection event |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |