A3P030 datasheet(16/220 Pages) MICROSEMI

16 / 220 page

ProASIC3 DC and Switching Characteristics

2-2

Revision 13

Table 2-2 • Recommended Operating Conditions 1,2

Symbol

Parameters 1

Commercial

Industrial

Units

Ambient temperature

0 to +70

-40 to +85

°C

Junction temperature

0 to 85

-40 to 100

°C

VCC3

1.5 V DC core supply voltage

1.425 to 1.575

VJTAG

JTAG DC voltage

1.4 to 3.6

VPUMP

Programming voltage

Programming Mode 4

3.15 to 3.45

Operation 5

0 to 3.6

VCCPLL

Analog power supply (PLL)

1.425 to 1.575

VCCI and VMV 6 1.5 V DC supply voltage

1.425 to 1.575

1.8 V DC supply voltage

1.7 to 1.9

2.5 V DC supply voltage

2.3 to 2.7

3.3 V DC supply voltage

3.0 to 3.6

3.3 V wide range DC supply voltage 7

2.7 to 3.6

LVDS/B-LVDS/M-LVDS differential I/O

2.375 to 2.625

LVPECL differential I/O

3.0 to 3.6

Notes:

1. All parameters representing voltages are measured with respect to GND unless otherwise specified.

2. To ensure targeted reliability standards are met across ambient and junction operating temperatures, Microsemi

recommends that the user follow best design practices using Microsemi’s timing and power simulation tools.

3. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each I/O

standard are given in Table 2-18 on page 2-18.

4. The programming temperature range supported is Tambient = 0°C to 85°C.

5. VPUMP can be left floating during operation (not programming mode).

6. VMV and VCCI should be at the same voltage within a given I/O bank. VMV pins must be connected to the

corresponding VCCI pins. See the "VMVx I/O Supply Voltage (quiet)" section on page 3-1 for further information.

7. 3.3 V wide range is compliant to the JESD8-B specification and supports 3.0 V VCCI operation.

Table 2-3 • Flash Programming Limits – Retention, Storage and Operating Temperature1

Product

Grade

Programming

Cycles

Program Retention

(biased/unbiased)

Maximum Storage

Temperature TSTG (°C) 2

Maximum Operating

Junction Temperature TJ (°C) 2

Commercial

500

20 years

110

100

Industrial

500

20 years

110

100

Notes:

1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.

2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device operating

conditions and absolute limits.

A3P030 датащи(PDF) 16 Page - Microsemi Corporation

A3P030 датащи(HTML) 16 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL