| поискавой системы для электроныых деталей |
|
WM8945ECS/R датащи(PDF) 64 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8945ECS/R датащи(HTML) 64 Page - Wolfson Microelectronics plc |
|
64 / 169 page ![]() WM8945 Production Data w PD, May 2011, Rev 4.1 64 The buffered VMID reference is enabled by setting VMID_BUF_ENA. This is applied to any disabled outputs, provided that the respective _VMID_OP_ENA bit is also set. The output resistance can be either 1k or 20k, depending on the respective _VROI register bit. The disabled output control bits are described in Table 41. See “Output Signal Path” for details of how to disable any of the audio outputs. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R2 (02h) Power management 1 2 VMID_BUF_ENA 0 VMID Buffer Enable. (The buffered VMID may be applied to disabled input and output pins.) 0 = Disabled 1 = Enabled R42 (2Ah) Output ctrl 13 SPKR_VMID_OP _ENA 0 Buffered VMID to SPKOUTR Enable 0 = Disabled 1 = Enabled 12 SPKL_VMID_OP _ENA 0 Buffered VMID to SPKOUTL Enable 0 = Disabled 1 = Enabled 10 LINEL_VMID_OP _ENA 0 Buffered VMID to LINEOUTL Enable 0 = Disabled 1 = Enabled 1 SPK_VROI 0 Buffered VREF to SPKOUTL / SPKOUTR resistance (Disabled outputs) 0 = approx 20k 1 = approx 1k 0 LINE_VROI 0 Buffered VREF to LINEOUTL resistance (Disabled output) 0 = approx 20k 1 = approx 1k Table 41 Disabled Output Control OUTPUT DISCHARGE CONTROL The line outputs and speaker outputs can be actively discharged to GND through internal resistors if desired. This is desirable at start-up in order to achieve a known output stage condition prior to enabling the soft-start VMID reference voltage. This is also desirable in shut-down to prevent the external connections from being affected by the internal circuits. The individual control bits for discharging each audio output are described in Table 42. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R42 (2Ah) Output ctrl 7 SPKR_DISCH 0 Discharges SPKOUTR output via approx 4k resistor 0 = Not active 1 = Actively discharging SPKOUTR 6 SPKL_DISCH 0 Discharges SPKOUTL output via approx 4k resistor 0 = Not active 1 = Actively discharging SPKOUTL 4 LINEL_DISCH 0 Discharges LINEOUTL output via approx 4k resistor 0 = Not active 1 = Actively discharging LINEOUTL Table 42 Output Discharge Control |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |