PIC32MX795F512LT-80ISLASHPF datasheet(249/256 Pages) MICROCHIP

249 / 256 page

DS61156G-page 249

PIC32MX5XX/6XX/7XX

Revision G (May 2011)

The revision includes the following global update:

• All references to VDDCORE/VCAP have been

changed to: VCORE/VCAP

• Added references to the new V-Temp temperature

range: -40ºC to +105ºC

This revision also includes minor typographical and

formatting changes throughout the data sheet text.

Major updates are referenced by their respective

section in the following table.

TABLE B-5:

MAJOR SECTION UPDATES

Section Name

Update Description

High-Performance, USB, CAN and

Ethernet 32-bit Flash Microcontrollers

Removed the shading for all D- and D+ pins in all pin diagrams.

1.0 “Device Overview”

Updated the VBUS description in Table 1-1.

2.0 “Guidelines for Getting Started with

32-bit Microcontrollers”

Added 2.11 “Referenced Sources”.

4.0 “Memory Organization”

Added Note 3 to the Interrupt Register Map tables (see Table 4-2 through

Table 4-7.

22.0 “10-bit Analog-to-Digital Converter

(ADC)”

Updated the ADC Conversion Clock Period Block Diagram (see

Figure 22-2).

26.0 “Comparator Voltage Reference

(CVREF)”

Updated the Comparator Voltage Reference Block Diagram (see

Figure 26-1).

28.0 “Special Features”

Removed the second paragraph from 28.3.1 “On-Chip Regulator and

POR”

31.0 “Electrical Characteristics”

Added the new V-Temp temperature range (-40ºC to +105ºC) to the

heading of all specification tables.

Updated the Ambient temperature under bias, updated the Voltage on

any 5V tolerant pin with respect to VSS when VDD < 2.3V, and added

Voltage on VBUS with respect to Vss in Absolute Maximum Ratings.

Added the characteristic, DC5a to Operating MIPS vs. Voltage (see

Table 31-1).

Updated or added the following parameters to the Operating Current

(IDD) DC Characteristics: DC20, DC20b, DC23, and DC23b (see

Table 31-5).

Added the following parameters to the Idle Current (IIDLE) DC

Characteristics: DC30b, DC33b, DC34c, DC35c, and DC36c (see

Table 31-6).

Added the following parameters to the Power-down Current (IPD) DC

Characteristics: DC40g, DC40h, DC40i, and DC41g, (see Table 31-7).

Added parameter IM51 and Note 3 to the I2Cx Bus Data Timing

Requirements (Master Mode) (see Table 31-32).

Updated the 10-bit ADC Conversion Rate Parameters (see Table 31-37).

Updated parameter AD57 (TSAMP) in the Analog-to-Digital Conversion

Timing Requirements (see Table 31-38).

32.0 “Packaging Information”

Updated the 64-Lead Plastic Quad Flat, No Lead Package (MR) –

9x9x0.9 mm Body [QFN] packing diagram.

Product Identification System

Added the new V-Temp (V) temperature information.

PIC32MX795F512LT-80I/PF датащи(PDF) 249 Page - Microchip Technology

PIC32MX795F512LT-80I/PF датащи(HTML) 249 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL