| поискавой системы для электроныых деталей |
|
MCP4716 датащи(PDF) 46 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP4716 датащи(HTML) 46 Page - Microchip Technology |
|
46 / 86 page ![]() MCP4706/4716/4726 DS22272A-page 46 © 2011 Microchip Technology Inc. 5.3.4 SLOPE CONTROL The MCP47X6 implements slope control on the SDA output. As the device transitions from HS mode to FS mode, the slope control parameter will change from the HS specification to the FS specification. For Fast (FS) and High-Speed (HS) modes, the device has a spike suppression and a Schmidt trigger at SDA and SCL inputs. 5.3.5 DEVICE ADDRESSING The address byte is the first byte received following the START condition from the master device. The MCP47X6’s slave address consists of a 4-bit fixed code (‘1100’) and a 3-bit code that is user specified when the device is ordered. This allows up to eight MCP47X6 devices on a single I2C bus. Figure 5-9 shows the I2C slave address byte format, which contains the seven address bits and a read/write (R/W) bit. Table 5-2 shows the eight I2C Slave address options and their respective device order code. FIGURE 5-9: Slave Address Bits in the I2C Control Byte. TABLE 5-2: I2C ADDRESS / ORDER CODE Start bit Read/Write bit Address Byte R/W ACK Acknowledge bit Slave Address 1 1 0 0 Slave Address (7-bits) A2 A1 A0 Note: Address Bits (A2:A0) specified at time of device order, see Table 5-2. Fixed User Specified 7-bit I2C Address Device Order Code Comment ‘1100000’ MCP47x6A0-E/xx MCP47x6A0T-E/xx Tape and Reel ‘1100001’ MCP47x6A1-E/xx MCP47x6A1T-E/xx Tape and Reel ‘1100010’ MCP47x6A2-E/xx MCP47x6A2T-E/xx Tape and Reel ‘1100011’ MCP47x6A3-E/xx MCP47x6A3T-E/xx Tape and Reel ‘1100100’ MCP47x6A4-E/xx MCP47x6A4T-E/xx Tape and Reel ‘1100101’ MCP47x6A5-E/xx MCP47x6A5T-E/xx Tape and Reel ‘1100110’ MCP47x6A6-E/xx MCP47x6A6T-E/xx Tape and Reel ‘1100111’ MCP47x6A7-E/xx MCP47x6A7T-E/xx Tape and Reel Note 1: The sample center will generally stock I2C address ‘1100000’, other addresses may be available. 2: ‘xx’ in the order code is the device package code (CH for SOT-23 and MA for DFN) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |