C167CS-L datasheet(63/81 Pages) INFINEON

63 / 81 page

C167CS-4R

C167CS-L

Data Sheet

V2.2, 2001-08

AC Characteristics

External Clock Drive XTAL1

(Operating Conditions apply)

Figure 13

External Clock Drive XTAL1

Note: If the on-chip oscillator is used together with a crystal, the oscillator frequency is

limited to a range of 4 MHz to 40 MHz.

It is strongly recommended to measure the oscillation allowance (or margin) in the

final target system (layout) to determine the optimum parameters for the oscillator

operation. Please refer to the limits specified by the crystal supplier.

When driven by an external clock signal it will accept the specified frequency

range. Operation at lower input frequencies is possible but is guaranteed by

design only (not 100% tested).

Table 12

External Clock Drive Characteristics

Parameter

Symbol

Direct Drive

1:1

Prescaler

2:1

PLL

1:N

Unit

min.

max.

min.

max.

min.

max.

Oscillator period

tOSC SR 25

–

371)

1) The minimum and maximum oscillator periods for PLL operation depend on the selected CPU clock generation

mode. Please see respective table above.

5001)

High time2)

2) The clock input signal must reach the defined levels V

IL2 and VIH2.

SR 123)

3) The minimum high and low time refers to a duty cycle of 50%. The maximum operating frequency (f

CPU) in

direct drive mode depends on the duty cycle of the clock input signal.

–

Low time2)

SR 123)

–

Rise time2)

SR –

–

Fall time2)

SR –

–

MCT02534

VIH2

VIL

0.5

OSC

C167CS-L датащи(PDF) 63 Page - Infineon Technologies AG

C167CS-L датащи(HTML) 63 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

датащи скачать

ссылки URL