PIC16F627A datasheet(133/180 Pages) MICROCHIP

133 / 180 page

DS40044D-page 131

PIC16F627A/628A/648A

16.9

MPLAB ICE 2000

High-Performance Universal

In-Circuit Emulator

The MPLAB ICE 2000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for

PICmicro microcontrollers. Software control of the

MPLAB ICE 2000 in-circuit emulator is advanced by

the MPLAB Integrated Development Environment,

which allows editing, building, downloading and source

debugging from a single environment.

The MPLAB ICE 2000 is a full-featured emulator

system with enhanced trace, trigger and data monitor-

ing features. Interchangeable processor modules allow

the system to be easily reconfigured for emulation of

different processors. The universal architecture of the

MPLAB ICE in-circuit emulator allows expansion to

support new PICmicro microcontrollers.

The MPLAB ICE 2000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

16.10 MPLAB ICE 4000

High-Performance Universal

In-Circuit Emulator

The MPLAB ICE 4000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for high-

end PICmicro microcontrollers. Software control of the

MPLAB ICE in-circuit emulator is provided by the

MPLAB Integrated Development Environment, which

allows editing, building, downloading and source

debugging from a single environment.

The MPLAB ICD 4000 is a premium emulator system,

providing the features of MPLAB ICE 2000, but with

increased emulation memory and high-speed perfor-

mance for dsPIC30F and PIC18XXXX devices. Its

advanced emulator features include complex triggering

and timing, up to 2 Mb of emulation memory and the

ability to view variables in real-time.

The MPLAB ICE 4000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft Windows 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

16.11 MPLAB ICD 2 In-Circuit Debugger

Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a

powerful,

low-cost,

run-time

development

tool,

connecting to the host PC via an RS-232 or high-speed

USB interface. This tool is based on the Flash

PICmicro MCUs and can be used to develop for these

and other PICmicro microcontrollers. The MPLAB

ICD 2 utilizes the in-circuit debugging capability built

into the Flash devices. This feature, along with

Microchip’s In-Circuit Serial ProgrammingTM (ICSPTM)

protocol, offers cost effective in-circuit Flash debugging

from the graphical user interface of the MPLAB

Integrated Development Environment. This enables a

designer to develop and debug source code by setting

breakpoints, single-stepping and watching variables,

CPU status and peripheral registers. Running at full

speed enables testing hardware and applications in

real-time. MPLAB ICD 2 also serves as a development

programmer for selected PICmicro devices.

16.12 PRO MATE II Universal Device

Programmer

The PRO MATE II is a universal, CE compliant device

programmer with programmable voltage verification at

VDDMIN and VDDMAX for maximum reliability. It features

an LCD display for instructions and error messages

and a modular detachable socket assembly to support

various package types. In Stand-Alone mode, the

PRO MATE II device programmer can read, verify and

program PICmicro devices without a PC connection. It

can also set code protection in this mode.

16.13 MPLAB PM3 Device Programmer

The MPLAB PM3 is a universal, CE compliant device

programmer with programmable voltage verification at

VDDMIN and VDDMAX for maximum reliability. It features

a large LCD display (128 x 64) for menus and error

messages and a modular detachable socket assembly

to support various package types. The ICSP™ cable

assembly is included as a standard item. In Stand-

Alone mode, the MPLAB PM3 device programmer can

read, verify and program PICmicro devices without a

PC connection. It can also set code protection in this

mode. MPLAB PM3 connects to the host PC via an RS-

232 or USB cable. MPLAB PM3 has high-speed com-

munications and optimized algorithms for quick pro-

gramming of large memory devices and incorporates

an SD/MMC card for file storage and secure data appli-

cations.

PIC16F627A датащи(PDF) 133 Page - Microchip Technology

PIC16F627A датащи(HTML) 133 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL