L9960 datasheet(93/95 Pages) STMICROELECTRONICS

93 / 95 page

DS11115 Rev 10

93/95

L9960, L9960T

Revision history

Table 101. Document revision history

Date

Revision

Changes

22-Jun-2015

Initial release.

25-Jun-2015

Updated CDM results in Section Table 4..

14-Sep-2015

Document status promoted from target specification to

production.

Updated:

– Description on page 1;

– Table 8: Timing characteristics (LS rise/fall time);

– Table 11: VPS electrical characteristics (Inserted limits for

Vs_clamp_neg);

– Table 63: Electrical characteristics (Updated limit for Itrack HS

range 2 and range 3, and update limits for CL hysteresis ,

range 0 and range 3);

– Table 71: Over-current detection electrical characteristics.

(corrected typo: thresholds range swap for OC range 3 for LS/HS);

– Table 4: Absolute maximum ratings (added note for ESD table

concerning HBM for OUTx and VPS).

– Table 98: SPI communication command and answer words

(added note for SPI command frame #3, #4 and #6).

07-Oct-2015

Table 71: Over-current detection electrical characteristics

corrected USL for Itrack.

Table 98: SPI communication command and answer words

updated Word ID “#6” from 0 to X; updated note “5”.

Table 99: SPI communication configuration updated Word ID

answer to #7d# (R9-R1 from 0 to X; updated note “1”.

02-Sep-2016

Modified title in cover page and added “AEC-Q100 qualified” as

first feature.

Updated:

– Table 6: Range of functionality: added note for Tj;

– Table 8: Timing characteristics for timings Td-On and Td_off;

– Figure 11: POR timing diagram;

– Table 32: HWSC/LBIST electrical characteristics: LBIST

duration and LBIST coverage;

– Section 4.6.2: Current slew rate,

– Section 4.6.3: Voltage slew rate: removed wrong note for OL

diagnostics in On-state not available during NOSR mode;

– Section 4.6.4: Current limitation: updated general description

on current limitation fucntionality, and corrected figure 20, 21

and 22 for Tdiag2 and ILIM_REG references.

Updated description and references for table 48 , 49 and 50;

– Table 8: Timing characteristics;

– Table 63: Electrical characteristics;

– Section 4.8.4: Diagnostic of "Over-current" in on-state

corrected typo in ISR limits;

– Section 4.8.5: Diagnostic of "Open Load" in on-state

description and corrected label for figure 28;

– Section 4.8.7: Off-state diagnostic.

Added Section 6: Reference document.

L9960 датащи(PDF) 93 Page - STMicroelectronics

L9960 датащи(HTML) 93 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95

датащи скачать

ссылки URL