| поискавой системы для электроныых деталей |
|
VSC8658 датащи(PDF) 62 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8658 датащи(HTML) 62 Page - Microsemi Corporation |
|
62 / 95 page ![]() Configuration VMDS-10242 VSC8658 Datasheet Revision 4.1 54 5.4.3 GPIO Input The input register contains information about the input to the device GPIO pins. Read from this register to access the data on the device GPIO pins. The following table shows the readout you can expect. 5.4.4 GPIO Output The output register allows you to access and control the output from the device GPIO pins. The following table shows the values you can write. 5.4.5 GPIO Pin Configuration Register 17G in the GPIO register space controls whether a particular GPIO pin functions as an input or an output. The following table shows the settings available. 5.4.6 100BASE-FX Control The 100BASE-FX control register can configure each PHY within the device to be in 100BASE-FX mode. The following table shows the values that can be written. Example 1 To configure all PHYs to 100BASE-FX mode, first ensure bit 15 = 0, then set bit 11 = 1 and bits 7:0 = 0x01, and then reset bit 15 = 1. Table 54 • GPIO Input, Address 15G (0x0F) Bit Name Access Description Default 15:0 GPIO [15:0] input RO Data read from the GPIO pins 0x00 Table 55 • GPIO Output, Address 16G (0x10) Bit Name Access Description Default 15:0 GPIO [15:0] output R/W Data written to the GPIO pins 0x00 Table 56 • GPIO Input/Output Configuration, Address 17G (0x11) Bit Name Access Description Default 15:0 GPIO [15:0] input or output enable R/W 1 = Pin is configured as an output. 0 = Pin is configured as an input. 0x00 Table 57 • 100BASE-FX Control, Address 18G (0x12) Bit Name Access Description Default 15 Activate 100BASE-FX R/W 0 = No action 1 = Activate 100BASE-FX based on bits 11:0 0 14:12 Reserved RO 000 11 100BASE-FX on all PHYs R/W 0 = No 100BASE-FX on all PHYs 1 = Configure 100BASE-FX on all PHYs 0 10:8 Individual 100BASE-FX setting R/W PHY number to be configured for 100BASE-FX mode 000 7:0 100BASE-FX mode R/W 0x00 = No 100BASE-FX 0x01 = 100BASE-FX mode 0x02 to 0xFF = Reserved 0x00 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |