| поискавой системы для электроныых деталей |
|
VSC8658 датащи(PDF) 59 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8658 датащи(HTML) 59 Page - Microsemi Corporation |
|
59 / 95 page ![]() Configuration VMDS-10242 VSC8658 Datasheet Revision 4.1 51 5.3.12 VeriPHY Control 3 The register at address 26E consists of the third of the three device registers that provide control over VeriPHY diagnostics features. Specifically, this register provides information about the termination status (fault condition) for all four link partner pairs. The following table shows the readouts you can expect. The following table shows the meanings for the various fault codes. 5.3.13 Reserved Extended Address Space The bits in the extended register page space at address 27E (0x1B) and 28E (0x1C) are reserved. 5.3.14 Ethernet Packet Generator Control 1 The EPG control register provides access to and control of various aspects of the EPG testing feature. There are two, separate EPG control registers. The following table shows the setting available in the first register. Table 48 • VeriPHY Control Register 3, Address 26E (0x1A) Bit Name Access Description Default 15:12 Pair A (1 and 2) termination status RO Termination fault for pair A (1 and 2) 0x00 11:8 Pair B (3 and 6) termination status RO Termination fault for pair B (3 and 4) 0x00 7:4 Pair C (4 and 5) termination status RO Termination fault for pair C (4 and 5) 0x00 3:0 Pair D (7 and 8) termination status RO Termination fault for pair D (7 and 8) 0x00 Table 49 • VeriPHY Control Register 3 Fault Codes Code Denotes 0000 Correctly terminated pair 0001 Open pair 0010 Shorted pair 0100 Abnormal termination 1000 Cross-pair short to pair A 1001 Cross-pair short to pair B 1010 Cross-pair short to pair C 1011 Cross-pair short to pair D 1100 Abnormal cross-pair coupling with pair A 1101 Abnormal cross-pair coupling with pair B 1110 Abnormal cross-pair coupling with pair C 1111 Abnormal cross-pair coupling with pair D Table 50 • EPG Control Register 1, Address 29E (0x1D) Bit Name Access Description Default 15 EPG enable R/W 1 = Enable EPG 0 14 EPG run or stop R/W 1 = Run EPG 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |