| поискавой системы для электроныых деталей |
|
VSC8658 датащи(PDF) 49 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC8658 датащи(HTML) 49 Page - Microsemi Corporation |
|
49 / 95 page ![]() Configuration VMDS-10242 VSC8658 Datasheet Revision 4.1 41 The following information applies to the interrupt status bits: • All set bits in this register are cleared after being read (self-clearing). If bit 26.15 is set, the cause of the interrupt can be read by reading bits 26.14:0. • For bits 26.14 and 26.12, bit 0.12 must be set for this interrupt to assert. • For bit 26.2, bits 4.8:5 must be set for this interrupt to assert. 5.2.22 MAC Interface Auto-Negotiation Control and Status Device auto-negotiation for the MAC interface is controlled in register 27. The same register is used to check the status of those parameters. The following table shows the settings available. Table 31 • MAC Auto-Negotiation Control and Status, Address 27 (0x1B) Bit Name Access Description Default 15 MAC or media interlock R/W This is a sticky bit. 1 = MAC interface disabled when media link down. 0 = MAC interface not suppressed by media link status. 0 14 MAC or media restart auto-negotiation interlock R/W This is a sticky bit. 1 = MAC interface restarts its auto-negotiation if the media link changes. 0 = MAC interface does not automatically change if media link changes. 0 13 MAC interface auto-negotiation auto-sense R/W This is a sticky bit. 1 = If MAC auto-negotiation is enabled, this allows the MAC interface to be able to link to MACs with auto-negotiation enabled and disabled. 0 = Normal MAC auto-negotiation behavior. 0 12 MAC interface auto-negotiation restart R/W This is a self-clearing bit. 1 = Restart auto-negotiation. 0 11:10 Reserved RO 9:8 Remote fault detected from MAC RO Corresponds to the remote fault bits sent by the MAC during auto-negotiation. 00 7 Asymmetric pause advertised by the MAC RO Corresponds to the asymmetric pause bit sent by the MAC during auto-negotiation. 0 6 Symmetric pause advertised by the MAC RO Corresponds to the symmetric pause bit sent by the MAC during auto-negotiation. 0 5 Full-duplex advertised by the MAC RO Corresponds to the full-duplex bit sent by the MAC during auto-negotiation. 0 4 Half-duplex advertised by the MAC RO Corresponds to the half-duplex bit sent by the MAC during auto-negotiation. 0 3MAC auto-negotiation capable RO 1 = MAC is auto-negotiation capable. 0 2 MAC interface link status RO 1 = The MAC interface is actively linked. 0 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |