| поискавой системы для электроныых деталей |
|
UPD360 датащи(PDF) 81 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UPD360 датащи(HTML) 81 Page - Microchip Technology |
|
81 / 221 page ![]() 2016-2017 Microchip Technology Inc. DS00002084C-page 81 UPD360 9.8.1 CONFIGURATION SELECTION The CFG_SEL0 and CFG_SEL1(UPD360-A/UPD360-B only) pins share the comparator with VBUS as shown in Figure 9-3. Each CFG_SELx pin is connected to a resistor divider, typically pulled up to VDDIO. After a system level reset (POR, RESET_N, Software Reset), both CFG_SELx pins are automatically sampled to configure the device. The CFG_SELx Match Registers (CFG_SELx_MATCH) are updated automatically and the device configures itself accord- ingly if standalone mode is detected. The various resistor settings for the CFG_SEL0 and CFG_SEL1 pins are detailed in Table 9-7 and Table 9-8, respec- tively. Note: For additional information on device resets, refer to Section 7.7, "Reset Operation," on page 34. TABLE 9-7: CONFIGURATION SELECT 0 (CFG_SEL0) SETTINGS Resistor (+/-1%) Description CFG_SEL0_MATCH Register GND Standalone DFP / USB58xx/USB59xx Companion DFP Device operates in standalone DFP mode (UPD360-A/UPD360-B only) for applications where an I2C connection to the host is not be present. The PWR_CAPx pins are used to select the USB Type-C™ current provided. 0000h 0.475 K Standalone UFP / USB58xx/USB59xx Companion UFP Device operates in standalone UFP mode (UPD360-A/UPD360-B only) for applications where an I2C connection to the host is not be present. 0001h 0.953 K I2C/SPI Companion Mode A (TBD) 0003h 1.43 K I2C/SPI Companion Mode B (TBD) 0007h 1.87 K I2C/SPI Companion Mode C (TBD) 000Fh 2.37 K I2C/SPI Companion Mode D (TBD) 001Fh 2.87 K I2C/SPI Companion Mode E (TBD) 003Fh 3.32 K I2C/SPI Companion Mode F (TBD) 007Fh 3.83 K I2C/SPI Companion Mode G (TBD) 00FFh 4.22 K I2C/SPI Companion Mode H (TBD) 01FFh 4.75 K I2C/SPI Companion Mode I (TBD) 03FFh 5.23 K I2C/SPI Companion Mode J (TBD) 07FFh 5.62 K I2C/SPI Companion Mode K (TBD) 0FFFh 6.19 K I2C/SPI Companion Mode L (TBD) 1FFFh 6.65 K I2C/SPI Companion Mode M (TBD) 3FFFh 7.15 K I2C/SPI Companion Mode N (TBD) 7FFFh >7.15 K I2C/SPI Companion Mode O (TBD) FFFFh Note: Any CFG_SEL0 value other than GND or 10.5K will select the I2C/SPI Companion mode. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |