| поискавой системы для электроныых деталей |
|
ACT5880 датащи(PDF) 34 Page - Active-Semi, Inc |
|
|
|||||||||||||||||||||||||||||
ACT5880 датащи(HTML) 34 Page - Active-Semi, Inc |
|
34 / 87 page ![]() ACT5880 Rev 2, 03-Sep-13 - 34 - www.active-semi.com ActivePMU TM and ActivePathTM are trademarks of Active-Semi. I2CTM is a trademark of NXP. Copyright © 2013 Active-Semi, Inc. Active-Semi Confidential―Do Not Copy or Distribute REGISTER AND BIT DESCRIPTIONS CONT’D BLOCK ADDRESS and BIT NAME DEFAULT and ACCESS DESCRIPTION 0xC8 7 x 0 W/R For internal use only. 6 x 0 W/R For internal use only. 5 VSETBB[5] 1 W/R Voltage setting for back-up battery charger, default 2.7V. This byte only could be written when the UNLOCBB is set to 1. Refer to the table of VBBAT VOLTAGE SETTINGS for details. 4 VSETBB[4] 1 3 VSETBB[3] 0 2 VSETBB[2] 1 1 VSETBB[1] 0 0 VSETBB[0] 1 0xC9 7 ONBB 1 W/R Set 1 enable, set 0 disable the back-up battery charger. 6 ONRTC 1 W/R Set 1 enable the always-on LDO, which powers the RTC block. Set 0 disable the always-on LDO for saving power when not used. 5 RFU 0 WE/R Reserved for future use. 4 UNLOCKBB 0 W/R Set 1 to allow change the back-up battery charger output voltage. 3 SCRATCH[3] x W/R 4 bits register for the equipment system to use. Data in those bits are kept until both the main battery and back-up battery loses. 2 SCRATCH[2] x 1 SCRATCH[1] x 0 SCRATCH[0] x 0xCA 7 x 0 W/R For internal use only. 6 x 0 W/R For internal use only. 5 VSETRTC[5] 1 W/R Always-on LDO output voltage setting, default is 1.8V. Refer to the STEP-DOWN DC/DC AND LDO OUTPUT VOLT- AGE SETTING table for details. 4 VSETRTC[4] 0 3 VSETRTC[3] 0 2 VSETRTC[2] 1 1 VSETRTC[1] 0 0 VSETRTC[0] 0 CHG 0xD0 7 VSET[3] 0 W/R Battery regulation voltage setting for the voltage output in the top- off state. The ENVISET[ ] has to be set to 1 for changing these bits. Refer to the table of CHARGER VOLTAGE SETTING for details. 6 VSET[2] 1 5 VSET[1] 0 4 VSET[0] 1 3 ISET[3] 0 W/R Fast charge current setting for the maximum current for fast charge. The ENVISET[ ] has to be set to1 for changing these bits. Refer to the table of FAST CHARGING CURRENT SETTING for details. 2 ISET[2] 1 1 ISET[1] 0 0 ISET[0] 0 BBU Note: W/R: Write and read accessible. WE/R: Write and read accessible, write exact what it is before to avoid unexpected behavior. X is uncertain volume. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |