| поискавой системы для электроныых деталей |
|
PIC32MX795F512LT-80I/PF датащи(PDF) 196 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC32MX795F512LT-80I/PF датащи(HTML) 196 Page - Microchip Technology |
|
196 / 256 page ![]() PIC32MX5XX/6XX/7XX DS61156G-page 196 © 2009-2011 Microchip Technology Inc. TABLE 31-18: PLL CLOCK TIMING SPECIFICATIONS (VDD = 2.3V TO 3.6V) AC CHARACTERISTICS Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated) Operating temperature -40°C ≤TA ≤+85°C for Industrial -40°C ≤TA ≤+105°C for V-Temp Param. No. Symbol Characteristics(1) Min. Typical Max. Units Conditions OS50 FPLLI PLL Voltage Controlled Oscillator (VCO) Input Frequency Range 4 — 5 MHz ECPLL, HSPLL, XTPLL, FRCPLL modes OS51 FSYS On-Chip VCO System Frequency 60 — 120 MHz — OS52 TLOCK PLL Start-up Time (Lock Time) — — 2 ms — OS53 DCLK CLKO Stability(2) (Period Jitter or Cumulative) -0.25 — +0.25 % Measured over 100 ms period Note 1: These parameters are characterized, but not tested in manufacturing. 2: This jitter specification is based on clock-cycle by clock-cycle measurements. To get the effective jitter for individual time-bases on communication clocks, use the following formula: For example, if SYSCLK = 80 MHz and SPI bit rate = 20 MHz, the effective jitter is as follows: EffectiveJitter DCLK SYSCLK CommunicationClock ---------------------------------------------------------- -------------------------------------------------------------- = EffectiveJitter DCLK 80 20 ------ -------------- DCLK 2 -------------- == TABLE 31-19: INTERNAL FRC ACCURACY AC CHARACTERISTICS Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated) Operating temperature -40°C ≤TA ≤+85°C for Industrial -40°C ≤TA ≤+105°C for V-Temp Param. No. Characteristics Min. Typical Max. Units Conditions Internal FRC Accuracy @ 8.00 MHz(1) for PIC32MX575/675/695/775 Family Devices F20a FRC -2 — +2 % — Internal FRC Accuracy @ 8.00 MHz(1,2) for PIC32MX534/564/664/764 Family Devices F20b FRC -0.9 — +0.9 % — Note 1: Frequency calibrated at 25°C and 3.3V. The TUN bits can be used to compensate for temperature drift. 2: This information is preliminary. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |