170 / 242 page

Removal and Replacement
Maintenance
812
6. Reinstallation:
a. To reinstall, align the inside of the knob to end of the shaft and push it
in until it snaps.
b. Insert the shaft of the assembled knob into its hole in the front panel
assembly until it stops.
c. Rotate the knob while lightly pushing inwards until the shaft slips into
its receptacle. Push all the way in to seat the knob assembly.
When reinstalling the
knobs, note there are two
sizes. Be sure to reinstall
the proper size knob in
the proper location.
Figure 84:Knob and Shaft Removal