57 / 242 page

Front Panel
TDS 310, TDS 320 & TDS 350 Instruction Manual
35
The WAVEFORM OFF button
turns off the presently
selected waveform.
The Waveform Select buttons
display and select waveforms
(CH1, CH2, MATH, REF1, and
REF2). A light next to a button
illuminates when that waveform is
selected.
Probe compensation output.
See page 27 for instructions on
how to compensate the probes.
Connector to chassis ground.
The Vertical POSITION knob
controls the vertical position of
the presently selected
waveform.
The VERTICAL MENU button calls
up the vertical operations menu.
For more information on vertical
operations, see page 317.
The VOLTS/DIV knob controls the
vertical scale of the presently
selected waveform.
Vertical Controls