71 / 242 page
Manipulating Waveforms
TDS 310, TDS 320 & TDS 350 Instruction Manual
319
Normal Waveform
Inverted Waveform
Figure 36:Inverting a Waveform
Select Bandwidth
Press the main menu button
Bandwidth. Use the
side menu to switch between 20 MHz and full bandwidth.
Make Fine V/div Adjustments
Press the main menu button Fine Scale
to activate the General Purpose Knob. Then use the knob to make precise
adjustments to the vertical scale setting.
Adjust Vertical Position
Press the main menu button Position to
activate the General Purpose Knob. Then, use the knob to adjust vertical
position or use the side menu to set the vertical position to 0 divisions. Verti
cal position is limited to a range of "5 divisions.
NOTE
This selection performs the same function as the vertical POSITION
knob.
Adjust Vertical Offset
Press the main menu button Offset to activate
the General Purpose Knob. Then use the knob to adjust offset oruse the
side menu to set the offset to 0 V. Offset performs the same basic function as
the vertical POSITION knob, but it has a widerrange. Use offset to view a
waveform that has a large DC bias.
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
