49 / 242 page
TDS 310, TDS 320 & TDS 350 Instruction Manual
211
Using Autoset
The TDS 300 Series autoset feature produces a stable, triggered display of
almost any input signal. To use autoset, connect a signal to either the CH 1 or
CH 2 input connector and press the AUTOSET button (shown in Fig
ure210).
Autoset
Figure 210:The AUTOSET Button
Table 21 specifies the changes autoset makes in your instrument setup.
Table21:Autoset Defaults
Control
Changed by Autoset to
Selected channel
If none already displayed, numerically
lowest of the displayed channels
Acquire Mode
Sample
Acquire Stop After
RUN/STOP button only
Display Style
Vectors
Display Intensity
Overall
If less than 50%, set to 75%
Display Format
YT
Horizontal Position
Centered within the graticule window
Horizontal Scale
As determined by the signal frequency
Horizontal Time Base
Main Only
Trigger Position
Unchanged
Trigger Type
Edge
Trigger Source
Numerically lowest of the displayed
channels (the selected channel)
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
