166 / 242 page

Removal and Replacement
Maintenance
88
Figure 81:Oscilloscope Orientation
EquipmentRequired
The following tools are required to completely disassemble the oscilloscope
into its modules. The tools required to remove an individual module are listed
in the first step of its procedure.
Table83:Tools Required for Module Removal
Item
No.
Name
Description
1
Screwdriver handle
Accepts TorxR driver bits.
2
T 15 Torx tip
TorxR driver bit for T 15 size screw
heads.
3
T 20 Torx tip
TorxR driver bit for T 20 size screw
heads. Used only for removal of the
cabinet handle.
4
Flat bladed screwdriver
Screwdriver for removing standard
head screws.