STM32H533CE datasheet(99/231 Pages) STMICROELECTRONICS

99 / 231 page

DS14539 Rev 1

99/231

STM32H533xx

Electrical characteristics

200

5.3

Operating conditions

5.3.1

General operating conditions

Table 18. Current characteristics

Symbol

Ratings

Max

Unit

∑IVDD

Total current into sum of all VDD power lines (source)(1)

1. All main power (VDD, VDDA, VDDIO2, and VBAT) and ground (VSS, VSSA) pins must always be connected to

the external power supplies, in the permitted range.

350

∑IVSS

Total current out of sum of all VSS ground lines (sink)(1)

350

IVDD

Maximum current into each VDD power pin (source)(1)

100

IVSS

Maximum current out of each VSS ground pin (sink)(1)

100

IIO(PIN)

Output current sunk/sourced by any I/O and control pin

∑IIO(PIN)

Total output current sunk by sum of all I/Os and control pins(2)

2. This current consumption must be correctly distributed over all I/Os and control pins. The total output

current must not be sunk/sourced between two consecutive power supply pins referring to high pin count

LQFP packages.

140

Total output current sourced by sum of all I/Os and control pins(2)

140

IINJ(PIN)(3)(4)

3. Positive injection (when VIN > VDDIOx) is not possible on these I/Os, and does not occur for input voltages

lower than the specified maximum value.

4. A negative injection is induced by VIN < VSS. IINJ(PIN) must never be exceeded. Refer to Table 17 for the

minimum allowed input voltage values.

Injected current on FT_xxx, TT_xx, NRST pins

-5 / 0

∑|IINJ(PIN)| Total injected current (sum of all I/Os and control pins)(5)

5. When several inputs are submitted to a current injection, the maximum ∑|IINJ(PIN)| is the absolute sum of

the negative injected currents (instantaneous values).

±25

Table 19. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

°C

Maximum junction temperature

130(1)

1. The junction temperature is limited to 105 °C in the VOS0 voltage range.

°C

Table 20. General operating conditions

Symbol

Parameter

Operating conditions

Min

Typ

Max

Unit

VDD

Standard operating

voltage

HSLV(1) = 0

1.71(2)

-3.6

HSLV(1) = 1

1.71(2)

-2.7

VDDIO2

PB8, PB9, PD6, PD7,

PG[9:14] I/Os supply

voltage

At least one I/O in PB8, PB9, PD6, PD7,

PG[9:14] is used, HSLV(1) = 0

1.08

3.6

At least one I/O in PB8, PB9, PD6, PD7,

PG[9:14] is used, HSLV(1) = 1

1.08

2.7

PB8,PB9, PD6,PD7, PG[9:14] not use

3.6

STM32H533CE датащи(PDF) 99 Page - STMicroelectronics

STM32H533CE датащи(HTML) 99 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL