LSM6DSV80X datasheet(14/181 Pages) STMICROELECTRONICS

номер детали	LSM6DSV80X

подробное описание детали	6-axis IMU (inertial measurement unit) with high-g accelerometer, embedded AI, and sensor fusion for wearables and sport trackers

PDF	181 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

14 / 181 page

7. Accelerometer noise density in normal mode is independent of the ODR and FS setting.

8. Noise RMS related to BW = ODR/2.

9. This ODR is available when the accelerometer is in low-power mode.

10. Values specified by design.

11. The sign of the linear acceleration self-test output change is defined by the ST_XL_[1:0] bits in a dedicated register for all axes.

12. The linear acceleration self-test output change is defined with the device in stationary condition as the absolute value of: OUTPUT[LSb]

(self-test enabled) - OUTPUT[LSb] (self-test disabled). 1LSb = 0.061 mg at ±2 g full scale.

13. Accelerometer self-test limits are full-scale independent.

14. The sign of the angular rate self-test output change is defined by the ST_G_[1:0] bits in a dedicated register for all axes.

15. The angular rate self-test output change is defined with the device in stationary condition as the absolute value of: OUTPUT[LSb] (self-test

enabled) - OUTPUT[LSb] (self-test disabled). 1LSb = 70 mdps at ±4000 dps full scale.

LSM6DSV80X

Module specifications

DS14764 - Rev 1

page 14/181

LSM6DSV80X датащи(PDF) 14 Page - STMicroelectronics