| поискавой системы для электроныых деталей |
|
PM7344 датащи(PDF) 37 Page - PMC-Sierra, Inc |
|
|
|||||||||||||||||||||||||||||
PM7344 датащи(HTML) 37 Page - PMC-Sierra, Inc |
|
37 / 293 page ![]() PM7344 S/UNI-MPH DATA SHEET PMC-950449 ISSUE 6 MULTI-PHY USER NETWORK INTERFACE PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 21 Pin Name Type Pin No. Function RDLCLK[4] RDLCLK[3] RDLCLK[2] RDLCLK[1]/ Output 78 77 76 75 Receive Data Link Clock (RDLCLK). The RDLCLK signal is available on this pin when the internal HDLC receiver (RFDL) is disabled from use. RDLCLK is used to process the data stream contained on RDLSIG. When the S/UNI- MPH is configured to receive T1-SF formatted data, or when the T1/E1 framers are bypassed, RDLCLK is held low. In all other formats the rising edge of RDLCLK can be used to sample the data on RDLSIG. RDLEOM[4] RDLEOM[3] RDLEOM[2] RDLEOM[1] Receive Data Link End of Message (RDLEOM). The RDLEOM signal is available on this pin when RFDL is enabled. RDLEOM goes high when the last byte of a received sequence is read from the RFDL FIFO buffer, or when the FIFO buffer is overrun. TDLSIG[4] TDLSIG[3] TDLSIG[2] TDLSIG[1]/ I/O 42 41 40 39 Transmit Data Link Signal (TDLSIG). The TDLSIG signal is input on this pin when the internal HDLC transmitter (XFDL) is disabled from use. TDLSIG is the source for the data stream to be inserted into the data link. When the S/UNI-MPH is configured to transmit T1-ESF formatted data, TDLSIG contains the data stream inserted in the facility data link; when the S/UNI-MPH is configured to transmit T1-SF formatted data, TDLSIG is ignored; when the S/UNI-MPH is configured to transmit E1 formatted data, TDLSIG contains the data stream inserted in timeslot 16 or a data stream inserted in any combination of the national bits. TDLSIG is sampled on the rising edge of TDLCLK. TDLINT[4] TDLINT[3] TDLINT[2] TDLINT[1] Transmit Data Link Interrupt (TDLINT). The TDLINT signal is output on this pin when XFDL is enabled. TDLINT goes high when the last data byte written to the XFDL has been set up for transmission and processor intervention is required to either write control information to end the message, or to provide more data. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |