RT600 datasheet(47/171 Pages) NXP

47 / 171 page

RT600

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2.2 — 25 January 2024

47 of 173

NXP Semiconductors

RT600

Dual-core microcontroller with 32-bit Cortex-M33 and Xtensa HiFi4

Audio DSP CPUs

VDDIO_1

E9;

J8;

E6; E8;

E10;

H13;

H14;

K13;

L14

F10;

F11;

F6; F7;

F9; J5;

[3]

- -

- Single 1.8 V to 3.3 V power supply for GPIOs defined as

belonging to the VDDIO_1 group. VDDIO_0, VDDIO_1, and

VDDIO_2 may be supplied at different voltage levels as

needed by the application.

VDDIO_1 supplies the following port pins: PIO0_14 to

PIO0_31; PIO1_0 to PIO1_10; PIO2_24 to PIO2_31;

PMIC_I2C_SCL and PMIC_I2C_SDA. See Table 5

VDDIO_2

N12;

P11;

P12

M7; M8 [3]

- -

- Single 1.8 V to 3.3 V power supply for GPIOs defined as

belonging to the VDDIO_2 group. VDDIO_0, VDDIO_1, and

VDDIO_2 may be supplied at different voltage levels as

needed by the application. VDDIO_2 supplies the following

port pins: PIO1_30 to PIO1_31 and PIO2_0 to PIO2_11. See

Table 5

VDD1V8

A9;

K2;

L10;

D5;

G8;

H10;

H11;

J10

B11;

C16;

C17;

E15;

F13;

G14;

L4;

R15

E8;

J14;

H6;G6;

H7; J7;

[3]

- -

- 1.8 V supply voltage for on-chip analog functions other than

the ADC and comparator.

VDDA_ADC1V8 [5]

H13

[3]

- -

- 1.8 V analog supply voltage for ADC and comparator.

VDDA_BIAS

[5]

E12

[3]

- -

- Bias for ADC and comparator. VDD_BIAS must be equal to

max ADC input voltage or max comparator input voltage.

VDDCORE

A10;

C1;

E8;

F1;

F6;

F7;

G2;

G7;

G10;

G11

C5; D9;

F14;

J4;

J14;

P9; R5;

R14

G9;

H10;

H8; H9;

J10;

J11;J8;

J9;

K10;

K8; K9;

[3]

- -

- Power supply for core logic. May be supplied from the internal

LDO or externally by an off-chip power management IC

(PMIC). An external filter capacitor is always required on

these pins, see Section 13.2 “Power Sequencing”

VREFN

[5]

G12

- -

- ADC negative reference voltage.

VREFP

[5]

F12

[3]

- -

- ADC positive reference voltage.

VDD1V8_1

A13

[3]

- -

- 1.8 V supply voltage for OTP during active mode. In

deep-sleep mode, this pin can be powered off to conserve

additional current (~ 65 uA). VDD1V8_1 must be stable

before performing any OTP related functions.

Table 4.

Pin description …continued

Symbol

Description

RT600 датащи(PDF) 47 Page - NXP Semiconductors

RT600 датащи(HTML) 47 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL