AT89LP2052 datasheet(15/90 Pages) ATMEL

номер детали	AT89LP2052

подробное описание детали	8-bit Microcontroller with 2/4-Kbyte Flash

PDF	90 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

15 / 90 page

3547F–MICRO–6/06

AT89LP2052/LP4052

A longer response time results if the request is blocked by one of the previously listed condi-

tions. If an interrupt of equal or higher priority level is already in progress, the additional wait time

depends on the nature of the other interrupt's service routine. If the instruction in progress is not

in its final clock cycle, the additional wait time cannot be more than 3 cycles, since the longest

are only 4 cycles long. If the instruction in progress is RETI or an access to IE or IP, the addi-

tional wait time cannot be more than 7 cycles (a maximum of three more cycles to complete the

instruction in progress, plus a maximum of 4 cycles to complete the next instruction). Thus, in a

single-interrupt system, the response time is always more than 5 clock cycles and less than

13 clock cycles. See Figures 13-1 and 13-2.

Figure 13-1. Minimum Interrupt Response Time

Figure 13-2. Maximum Interrupt Response Time

Clock Cycles

INT0

IE0

Instruction

LCALL

1st ISR Instr.

Cur. Instr.

Ack.

Clock Cycles

INT0

IE0

113

Instruction

RETI

4 Cyc. Instr.

LCALL

1st ISR In

Ack.

AT89LP2052 датащи(PDF) 15 Page - ATMEL Corporation