UPD17062 datasheet(28/298 Pages) RENESAS

номер детали	UPD17062

подробное описание детали	MOS INTEGRATED CIRCUIT

PDF	298 Pages

Scroll/Zoom	100%

производитель	RENESAS [Renesas Technology Corp]

домашняя страница	http://www.renesas.com

Logo

28 / 298 page

µPD17062

4. STACK

The stack is a register used to save an address returned by a program or the contents of the system register,

described later, when a subroutine call occurs or an interrupt is accepted.

4.1

COMPONENTS

The stack consists of a stack pointer (SP), which is a 4-bit binary counter, six 13-bit address stack registers

(ASRs), and two 3-bit interrupt stack registers.

4.2

STACK POINTER (SP)

The stack pointer is located at address 01H in the register file, and specifies an address stack register. The

contents of the stack pointer are decremented by 1 whenever a push operation (CALL, MOVT, or PUSH

instruction or interrupt acceptance) is performed, or incremented by 1 whenever a pop operation (RET, RETSK,

RETI, MOVT, or POP instruction) is performed.

The high-order bit of the stack pointer is always set to 0. The stack pointer can indicate any of eight different

values, 0H to 7H. However, 6H and 7H are not assigned to the stack.

Fig. 4-1

Structure of Stack Pointer

Table 4-1

Behavior of Stack Pointer

(SPb2)

(SPb1)

(SPb0)

MSB

LSB

Instruction

Stack pointer value

CALL addr

CALL @AR

MOVT DBF, @AR

SP – 1

PUSH AR

Interrupt acceptance

RET

RETSK

MOVT DBF, @AR

SP + 1

POP AR

RETI

UPD17062 датащи(PDF) 28 Page - Renesas Technology Corp