| поискавой системы для электроныых деталей |
|
MEC1632 датащи(PDF) 103 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MEC1632 датащи(HTML) 103 Page - Microchip Technology |
|
103 / 636 page ![]() 2012-2018 Microchip Technology Inc. DS00001592B-page 103 MEC1632 7.4.6 32 KHZ CLOCK DOMAIN SWITCHING Clock sources for the 32K Clock Domain are illustrated in Figure 7-7 includes both an internal 32.768 KHz Silicon Oscil- lator, 32.768 KHz Crystal Oscillator and an external 32 KHz clock source. 32 KHz Clock Domain Switching is con- trolled as defined in Table 7-9. The external 32 KHz clock source is configured using the EXT32K_VBAT bit D0 in the Clock Enable Register. Note 7-7 The internal 32kHz Clock Source must first be enabled via the Clock Enable Register before switching to the External 32kHz clock source either in the Forced mode (external only) or the auto- switch mode. Note 7-8 32K_EN is bit D1 in the Clock Enable Register. Note 7-9 AD_EN is bit D2 in the Clock Enable Register. Note 7-10 XTL32K_EN is bit D3 in the Clock Enable Register. Note 7-11 XTL_SEL is bit D4 in the Clock Enable Register. Note 7-12 If AD_EN is asserted (‘1’), the external 32 KHz Oscillator is selected and the external 32 KHz clock stops (i.e., stays high or low for longer than ~31 s), the external clock must remain stopped for a minimum of 300 s. If AD_EN is asserted (‘1’), and the 32K_EN changes from asserted (‘1’) to de-asserted, AD_EN must remain asserted for a minimum of 300 s. At least one of 32K_EN or XTL32K_EN must be set to ‘1’ when switching AD_EN from ‘0’ to ‘1’ in order for clock domain switching to take place. Once the 32K domain is switched, 32K_EN or XTL32K_EN can be set to ‘0’. Note 7-13 The 32.768 KHz Crystal Oscillator can be driven by a crystal or an external 32 KHz single-ended clock source as defined by the XOSEL bit in the Clock Enable Register. TABLE 7-9: 32KHZ CLOCK DOMAIN CONTROL XTL_SEL ( Note 7-11) XTL32K_EN ( Note 7-10) AD_EN ( Note 7-9) 32K_EN ( Note 7-8) Mode ( Note 7-7) Description Notes X 0 0 0 Off 32 KHz clocking (inter- nal/external) disabled (default) 0 X 0 1 Internal Internal 32.768 KHz Silicon Oscillator only 1 1 0 X Internal Internal 32.768 KHz Crystal Oscillator only Note 7-13 X 0 1 0 External External 32 KHz input (32KHZ_IN pin) only Note 7-12 0 X 1 1 Auto Switch Internal 32 KHz clock source used only if external not detected. 11 X |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |