TPS65982ABZBHR datasheet(84/121 Pages) TI1

84 / 121 page

DC Current (A)

3.2

3.4

3.6

3.8

4.2

4.4

4.6

4.8

100

200

300

400

500

600

700

800

900

1000

D012

TPS65982

SLVSD02D – MARCH 2015 – REVISED JUNE 2019

www.ti.com

Product Folder Links: TPS65982

Submit Documentation Feedback

10.2.1.3 Application Curve

Figure 78. PP_EXT Power Loss (RNFETS + RSENSE = 30 mΩ)

10.2.2 Dual-Port Notebook Application Supporting USB PD Charging and DisplayPort

The TPS65982 features support for DisplayPort over Type-C alternate mode and manages sinking and sourcing

of power in Power Delivery. The block diagram, shown in Figure 79, shows a two port system that is capable of

charging from either Type C port over PD, DisplayPort Alternate Mode, and delivering Battery Power to a bus-

powered device. With the DisplayPort support, the TPS65982 controls an external SuperSpeed multiplexer,

HD3SS460, to route the appropriate super-speed signals to the Type-C connector. The HD3SS460 is controlled

through GPIOs configured by the TPS65982 application code and the HD3SS460 is designed to meet the timing

requirements defined by the DisplayPort over Type-C specification. A system controller is also necessary to

handle some of the dynamic aspects of Power Delivery such as reducing power capabilities when system battery

power is low. Audio accessory device is supported by the design as well. Although USB_RP_P and USB_RP_N

are not shown in the block diagram, they must be connected to the system-side IC that will receive and send

USB2.0 high-speed data through the integrated multiplexer of the TPS65982.

TPS65982ABZBHR датащи(PDF) 84 Page - Texas Instruments