 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
AP0100CS датащи(PDF) 54 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AP0100CS датащи(HTML) 54 Page - ON Semiconductor |
|
|
54 / 73 page  AP0100CS HDR: Image Signal Processor (ISP) Summary of Host Commands AP0100CS/D Rev. 6, Pub. 1/16 EN 54 ©Semiconductor Components Industries, LLC,2016. Summary of Host Commands Table 20 on page 54 through Table 31 on page 56 show summaries of the host commands. The commands are divided into the following sections: • System Manager •Overlay •GPIO • Flash Manager •STE • Sequencer • Patch Loader •Miscellaneous • Calibration Stats Following is a summary of the Host Interface commands. The description gives a quick orientation. The “Type” column shows if it is an asynchronous or synchronous command. For a complete list of all commands including parameters, consult the Host Command Interface Specification document. Table 20: System Manager Host Command System Manager Host Command Value Type Description Set State 0x8100 Asynchronous Request the system enter a new state Get State 0x8101 Synchronous Get the current state of the system Config Power Management 0x8102 Synchronous Configures the power state of the system Table 21: Overlay Host Commands Overlay Host Command Value Type Description Enable Overlay 0x8200 Synchronous Enable or disable the overlay subsystem Get Overlay State 0x8201 Synchronous Retrieves the state of the overlay subsystem Set Calibration 0x8202 Synchronous Set the calibration offset Set Bitmap Property 0x8203 Synchronous Set a property of a bitmap Get Bitmap Property 0x8204 Synchronous Get a property of a bitmap Set String Property 0x8205 Synchronous Set a property of a character string Load Buffer 0x8206 Asynchronous Load an overlay buffer with a bitmap (from Flash) Load Status 0x8207 Synchronous Retrieve status of an active load buffer operation Write Buffer 0x8208 Synchronous Write directly to an overlay buffer Read Buffer 0x8209 Synchronous Read directly from an overlay buffer Enable Layer 0x820A Synchronous Enable or disable an overlay layer Get Layer Status 0x820B Synchronous Retrieve the status of an overlay layer Set String 0x820C Synchronous Set the character string Get String 0x820D Synchronous Get the current character string Load String 0x820E Asynchronous Load a character string (from Flash) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
