MEC1322 datasheet(206/456 Pages) MICROCHIP

206 / 456 page

MEC1322

DS00001719D-page 206

 2014 - 2015 Microchip Technology Inc.

15.9.2

GIRQ9

[15:8]

GPIO[157:150]

GPIO_Event

Bits[8:15] are controlled by the GPIO_Events gener-

ated by GPIO150 through GPIO157, respectively.

The GPIO Interface can generate an interrupt source

event on a high level, low level, rising edge and fall-

ing edge, as configured by the Interrupt Detection

(int_det) bits in the Pin Control Register associated

with the GPIO signal function.

[21:16]

GPIO[165:160]

GPIO_Event

Bits[16:21] are controlled by the GPIO_Events gen-

erated by GPIO160 through GPIO165, respectively.

The GPIO Interface can generate an interrupt source

event on a high level, low level, rising edge and fall-

ing edge, as configured by the Interrupt Detection

(int_det) bits in the Pin Control Register associated

with the GPIO signal function.

[30:22]

Reserved

n/a

See Table 15-7, "GIRQx Source Register", Table 15-

8, "GIRQx Enable Set Register", Table 15-10,

"GIRQx Enable Clear Register", and Table 15-9,

"GIRQx Result Register" for a definition of this bit for

the Source, Enable, and Result registers.

TABLE 15-12: BIT DEFINITIONS FOR GIRQ9 SOURCE, ENABLE, AND RESULT REGISTERS

Bit

Block Instance

Name

Source Name

Wake

Source Description

[7:0]

GPIO[107:100]

GPIO_Event

Bits[0:7] are controlled by the GPIO_Events generated

by GPIO100 through GPIO107, respectively.

The GPIO Interface can generate an interrupt source

event on a high level, low level, rising edge and falling

edge, as configured by the Interrupt Detection (int_det)

bits in the Pin Control Register associated with the

GPIO signal function.

[15:8]

GPIO[117:110]

GPIO_Event

Bits[8:15] are controlled by the GPIO_Events gener-

ated by GPIO110 through GPIO117, respectively.

The GPIO Interface can generate an interrupt source

event on a high level, low level, rising edge and falling

edge, as configured by the Interrupt Detection (int_det)

bits in the Pin Control Register associated with the

GPIO signal function.

[23:16]

GPIO[127:120]

GPIO_Event

Bits[16:23] are controlled by the GPIO_Events gener-

ated by GPIO120 through GPIO127, respectively.

The GPIO Interface can generate an interrupt source

event on a high level, low level, rising edge and falling

edge, as configured by the Interrupt Detection (int_det)

bits in the Pin Control Register associated with the

GPIO signal function.

TABLE 15-11: BIT DEFINITIONS FOR GIRQ8 SOURCE, ENABLE, AND RESULT REGISTERS

Bit

Block Instance

Name

Source Name

Wake

Source Description

MEC1322 датащи(PDF) 206 Page - Microchip Technology

MEC1322 датащи(HTML) 206 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL