| поискавой системы для электроныых деталей |
|
MEC1322 датащи(PDF) 51 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MEC1322 датащи(HTML) 51 Page - Microchip Technology |
|
51 / 456 page ![]() 2014 - 2015 Microchip Technology Inc. DS00001719D-page 51 MEC1322 Note 3-5 The chipset will not produce a valid 32KHz clock until about 5 ms (PCH) or 110 ms (ICH) after the deassertion of RSMRST#. See chipset specification for the actual timing. Note 3-6 The 48 MHz Ring Oscillator is reset by VCC1GD. Note 3-7 The Clock Enable Register contains the XOSEL bit and the 32K_EN bit (see Section 4.7.2, "Clock Enable Register," on page 73). The 32.768 KHz Oscillator provides a stable timebase for the 48 MHz Ring Oscillator as well as the clock source for the 32KHz Clock Domain. After VBAT POR there is a 500ms max time for the 48 MHz Ring Oscillator to become accurate. 3.5.1 32KHZ CLOCK SWITCHING The 32kHz clock switching logic switches the clock source of the 32kHz clock domain to be either the single-ended 32.768 KHz clock input or the 32.768 kHz Crystal Oscillator. If neither of these is available, this clock domain is derived from the 48 MHz Ring Oscillator. Following a VBAT_POR, the XOSEL bit and the 32K_EN bit in the Clock Enable Register are programmed to configure the source of this clock domain. If the single-ended 32.768 KHz clock input is configured as the source of the 32kHz clock domain, then following a VCC1_RESET, the time for this clock domain to become accurate at 32.768kHz after the SUSCLK input goes active is 100us (max). If the 32.768 kHz Crystal Oscillator is configured as the source of the 32kHz clock domain, then following a VCC1_RE- SET, there is 100us (max) delay time for this clock domain to become accurate at 32.768kHz. 3.5.2 CLOCK DOMAINS VS. ACPI POWER STATES Table 3-6, "Typical MEC1322 Clocks vs. ACPI Power States" shows the relationship between ACPI power states and MEC1322 clock domains: TABLE 3-6: TYPICAL MEC1322 CLOCKS VS. ACPI POWER STATES Clock Name ACPI Power State Description S0 (FULL ON) S1 (POS) S3 (STR) S4 (STD) S5 (Soft Off) G3 (MECH Off) SUSCLK ON ON ON ON ON OFF This clock is the system suspend clock source. (Note 3-5). 32.768 kHz Crystal Oscillator ON ON ON ON ON ON This clock is generated from a 32.768 KHz paral- lel resonant crystal con- nected between the XTAL1 and XTAL2 pins. 32KHz_Clk ON ON ON ON ON ON/ OFF This clock domain is gen- erated from the 32KHz clock input (SUSCLK) when available or the crystal oscillator pins. Otherwise it is generated internally from the 48 MHz Ring Oscillator. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |