4513 datasheet(119/210 Pages) RENESAS

119 / 210 page

APPLICATION

2.2 Interrupts

2-16

4513/4514 Group User’s Manual

2.2.3 Interrupt application examples

(1)

External 0 interrupt

The INT0 pin is used for external 0 interrupt, of which valid waveforms can be chosen, which can

recognize the change of both edges (“H”

→“L” or “L”→“H”).

Outline: An external 0 interrupt can be used by dealing with the change of edge (“H”

→“L” or

“L”

→“H”) in both directions as a trigger.

Specifications: An interrupt occurs by the change of an external signals edge (“H”

→“L” or “L”→“H”).

Figure 2.2.1 shows an operation example of an external 0 interrupt, and Figure 2.2.2 shows a setting

example of an external 0 interrupt.

(2)

External 1 interrupt

The INT1 pin is used for external 1 interrupt, of which valid waveforms can be chosen, which can

recognize the change of both edges (“H”

→“L” or “L”→“H”).

Outline: An external 1 interrupt can be used by dealing with the change of edge (“H”

→“L” or

“L”

→“H”) in both directions as a trigger.

Specifications: An interrupt occurs by the change of an external signals edge (“H”

→“L” or “L”→“H”).

Figure 2.2.3 shows an operation example of an external 1 interrupt, and Figure 2.2.4 shows a setting

example of an external 1 interrupt.

(3)

Timer 1 interrupt

Constant period interrupts by a setting value to timer 1 can be used.

Outline: The constant period interrupts by the timer 1 underflow signal can be used.

Specifications: Prescaler and timer 1 divide the system clock frequency f(XIN) = 4.0 MHz, and the

timer 1 interrupt occurs every 1 ms.

Figure 2.2.5 shows a setting example of the timer 1 constant period interrupt.

(4)

Timer 2 interrupt

Constant period interrupts by a setting value to timer 2 can be used.

Outline: The constant period interrupts by the timer 2 underflow signal can be used.

Specifications: Timer 2 divides the 16-bit fixed dividing frequency timer, and the timer 2 interrupt

occurs every about 2 sec.

Figure 2.2.6 shows a setting example of the timer 2 constant period interrupt.

(5)

Timer 3 interrupt

Constant period interrupts by a setting value to timer 3 can be used.

Outline: The constant period interrupts by the timer 3 underflow signal can be used.

Specifications: Prescaler and timer 3 divide the system clock frequency f(XIN) = 4.0 MHz, and the

timer 3 interrupt occurs every 1 ms.

Figure 2.2.7 shows a setting example of the timer 3 constant period interrupt.

4513 датащи(PDF) 119 Page - Renesas Technology Corp

4513 датащи(HTML) 119 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL