4513 datasheet(114/210 Pages) RENESAS

114 / 210 page

APPLICATION

2.2 Interrupts

2-11

4513/4514 Group User’s Manual

2.2 Interrupts

The 4513/4514 Group has eight interrupt sources : external (INT0, INT1), timer 1, timer 2, timer 3, timer 4,

A-D, and serial I/O.

This section describes individual types of interrupts, related registers, application examples using interrupts

and notes.

2.2.1 Interrupt functions

(1)

External 0 interrupt (INT0)

The interrupt request occurs by the change of input level of INT0 pin.

The interrupt valid waveform can be selected by the bits 1 and 2 of the interrupt control register I1.

s External 0 interrupt INT0 processing

q When the interrupt is used

The interrupt occurrence is enabled when the bit 0 of the interrupt control register V1 and the

interrupt enable flag INTE are set to “1.” When the external 0 interrupt occurs, the interrupt

processing is executed from address 0 in page 1.

q When the interrupt is not used

The interrupt is disabled and the SNZ0 instruction is valid when the bit 0 of register V1 is set

to “0.”

(2)

External 1 interrupt (INT1)

The interrupt request occurs by the change of input level of INT1 pin.

The interrupt valid waveform can be selected by the bits 1 and 2 of the interrupt control register I2.

s External 1 interrupt INT1 processing

q When the interrupt is used

The interrupt occurrence is enabled when the bit 1 of the interrupt control register V1 and the

interrupt enable flag INTE are set to “1.” When the external 1 interrupt occurs, the interrupt

processing is executed from address 2 in page 1.

q When the interrupt is not used

The interrupt is disabled and the SNZ1 instruction is valid when the bit 1 of register V1 is set

to “0.”

(3)

Timer 1 interrupt

The interrupt request occurs by the timer 1 underflow.

s Timer 1 interrupt processing

q When the interrupt is used

The interrupt occurrence is enabled when the bit 2 of the interrupt control register V1 and the

interrupt enable flag INTE are set to “1.” When the timer 1 interrupt occurs, the interrupt processing

is executed from address 4 in page 1.

q When the interrupt is not used

The interrupt is disabled and the SNZT1 instruction is valid when the bit 2 of register V1 is set

to “0.”

4513 датащи(PDF) 114 Page - Renesas Technology Corp

4513 датащи(HTML) 114 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL