4-Port PoE Manager

Microsemi Proprietary and Confidential. PD69104B1/F Datasheet Revision 2.0

3

2.2

Typical Application

The following illustration shows a typical application with a simple plug and play PoE solution for a single

Ethernet port, switch, or hub.

Plug the positive (POS) and negative (NEG) signals into the RJ45 switch jack.

Figure 1 • Typical Application

Note: Fuses per port are not required for use in circuits with total power level of up to 3 kW, as the

PD69104B1/F designed to fulfill limited power source (LPS) requirements per the latest editions of

IEC60950-1 and EN60950-1.

For more information on detailed schematics of application and layout recommendations, contact your

local Microsemi account representative.