AT83SND2CMP3B datasheet(20/241 Pages) ATMEL

20 / 241 page

4341F–MP3–03/06

AT8xC51SND2C/MP3B

6.2.3

Hardware Security Space

This space is composed of one Byte: the Hardware Security Byte (HSB see Table 6-3) divided in

2 separate nibbles. The MSN contains the X2 mode configuration bit and the Boot Loader Jump

Bit as detailed in Section “Boot Memory Execution”, page 20 and can be written by software

while the LSN contains the lock system level to protect the memory content against piracy as

detailed in Section “Hardware Security System”, page 20 and can only be written by hardware.

6.2.4

Extra Row Space

This space is composed of 2 Bytes:

•

The Software Boot Vector (SBV, see Table 6-4).

This Byte is used by the software boot loader to build the boot address.

•

The Software Security Byte (SSB, see Table 6-5).

This Byte is used to lock the execution of some boot loader commands.

6.3

Hardware Security System

The AT89C51SND2C implements three lock bits LB2:0 in the LSN of HSB (see Table 6-3) pro-

viding three levels of security for user’s program as described in Table 6-1 while the

AT83SND2C is always set in read disabled mode.

Level 0 is the level of an erased part and does not enable any security feature.

Level 1 locks the hardware programming of both user and boot memories.

Level 2 locks also hardware verifying of both user and boot memories

Level 3 locks also the external execution.

Notes:

1. U means unprogrammed, P means programmed and X means don’t care (programmed or

unprogrammed).

2. AT89C51SND2C products are delivered with third level programmed to ensure that the code

programmed by software using ISP or user’s boot loader is secured from any hardware piracy.

6.4

Boot Memory Execution

As internal C51 code space is limited to 64K Bytes, some mechanisms are implemented to allow

boot memory to be mapped in the code space for execution at addresses from F000h to FFFFh.

The boot memory is enabled by setting the ENBOOT bit in AUXR1 (see Figure 6-2). The three

ways to set this bit are detailed in the following sections.

6.4.1

Software Boot Mapping

The software way to set ENBOOT consists in writing to AUXR1 from the user’s software. This

enables boot loader or API routines execution.

Table 6-1.

Lock Bit Features

(1)

Level

LB2

LB1

LB0

Internal

Execution

External

Execution

Hardware

Verifying

Hardware

Programming

Software

Programming

Enable

Disable

Enable

Disable

Enable

(3)

Enable

Disable

Enable

AT83SND2CMP3B датащи(PDF) 20 Page - ATMEL Corporation

AT83SND2CMP3B датащи(HTML) 20 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL