GRM0332C2A6R9DA01 datasheet(2/89 Pages) MURATA1

2 / 89 page

For applications that do not require the particular reliability such as

the general equipment

Powertrain/Safety for Automotive

Product used for applications (running, turning, stopping and safety

devices) which particularly concern human life, such as in devices for

automobiles.

Infotainment for Automotive

The product for entertainment equipment like car navigations, car

audios, and body control equipment like wipers, power windows.

Medical-grade products for Implanted Medical Devices

These products are intended for use in implanted medical devices

such as cardiac pacemakers, cochlear implants, insulin pumps and

gastric electrostimulators.

They are suitable for use in non-critical circuits. *1

Non-critical circuits

This term refers to circuits in implanted medical devices that are

not directly linked to life support, i.e. circuits that will not directly

endanger the life of the patient should the functionality of the

device be reduced or halted by failure of the circuit.

AEC-Q200 compliant product

Derating 1

This product is suitable when a voltage continuously applied to a

capacitor in an operating circuit, is used below (derated) the rated

voltage of the capacitor. This model guarantees the test conditions in

the endurance test, at a rated voltage x 100% at the maximum

operating temperature. A reliability assurance level equivalent to a

common product can be secured, by using this product within the

voltage and temperature derated conditions recommended in the

ﬁgure below.

Derating 2

When the product temperature exceeds 105°C, please use this

product within the voltage and temperature derated conditions in the

ﬁgure below.

Derating 4

When the product temperature exceeds 125°C, please use this

product within the voltage and temperature derated conditions in the

ﬁgure below.

Derating 3

Please apply the derating curve according to the operating

temperature.

Please refer to detailed speciﬁcations sheet for details.

Derating 5

Please apply the rated voltage derating over 150 °C.

Please refer to detailed speciﬁcations sheet for details.

Safety Standard Certiﬁed Product

Products that acquired safety standard certiﬁcation IEC60384-14

and products based on the Electrical Appliance and Material Safety

Law of Japan.

Low dissipation for high frequency

By devising ceramic materials and electrode materials, low

dissipation is achieved in frequency bands of VHF, UHF and

microwave or beyond.

Low inductance

This capacitor is designed so that the parasitic inductance

component (ESL) that the capacitor has on the high frequency side

becomes lower.

Product suitable for acoustic noise reduction and low distortion

This product suppresses acoustic noise, which occurs when a

ceramic capacitor is used, by devising the materials and

conﬁguration.

Links are provided to the latest information from the PDF version of the catalog, which is available on the web.

Fail safe product

This capacitor is designed to prevent failures as much as possible by

short mode.

Based on the Electrical Appliance and Material Safety Law of Japan

Products that are based on the electrical appliance and material

safety law of Japan.

Product resistant to deﬂection cracking

This capacitor is designed to prevent failures as much as possible by

short mode caused by cracking when there is board deﬂection.

Product with solder cracking suppression

“This capacitor is conﬁgured with metal terminals and leads

connected to the chip. The metal terminals and leads relieve the

stress from expansion and contraction of the solder, to suppress

solder cracking.”

Low-inductance product suitable for noise suppression.

This product has extremely low ESL and is suitable for suppression

of noise, including high frequencies.

This product can also be used as a low-ESL, high-performance

bypass capacitor.

Product for bonding

Since gold is used for the external electrodes, the capacitor can be

mounted by die bonding/wire bonding.

No DC bias characteristics

Polymer capacitor is no capacitance change with DC bias due to

aluminum oxidized ﬁlm for dielectric.

Recommended Conditions of the Derating Operating Voltage and Temperature

025

100

125

150

100

120

Product Temperature (°C)

125°C Type

105°C Type

85°C Type

025

100

125

150

Product Temperature (°C)

400

500

100

200

300

600

700

Rated Voltage 630V

Rated Voltage 450V

(350V)

(450V)

-75

-50

-25

100 125 150 175

Product Temperature (°C)

120

100

(50)

Explanation of Symbols in This Catalog

WEB

C02E.pdf

Nov.27,2017

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

GRM0332C2A6R9DA01 датащи(PDF) 2 Page - Murata Manufacturing Co., Ltd

GRM0332C2A6R9DA01 датащи(HTML) 2 Page - Murata Manufacturing Co., Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

датащи скачать

ссылки URL