MPC755 RISC Microprocessor Hardware Specifications, Rev. 6.1

52

Freescale Semiconductor

Ordering Information

10 Ordering Information

Ordering information for the devices fully covered by this specification document is provided in Section 10.1, “Part

Numbers Fully Addressed by This Document.” Note that the individual part numbers correspond to a maximum

processor core frequency. For available frequencies, contact your local Freescale sales office. In addition to the

processor frequency, the part numbering scheme also includes an application modifier which may specify special

application conditions. Each part number also contains a revision code which refers to the die mask revision number.

Section 10.2, “Part Numbers Not Fully Addressed by This Document,” lists the part numbers which do not fully

conform to the specifications of this document. These special part numbers require an additional document called a

part number specification.

10.1 Part Numbers Fully Addressed by This Document

Table 20 provides the Freescale part numbering nomenclature for the MPC755 and MPC745 devices fully addressed

by this document.

10.2 Part Numbers Not Fully Addressed by This Document

Devices not fully addressed in this specification document are described in separate part number specifications

which supplement and supersede this document, as described in the following tables.

Table 20. Part Numbering Nomenclature

XPC

xxx

x

xx

nnn

x

x

Product

Code

Part

Identifier

Process

Descriptor

Processor

Frequency

Application Modifier

Revision Level

755

745

B = HiP4DP

PX = PBGA

RX = CBGA

300

350

L: 2.0 V ± 100 mV

0° to 105°C

E: 2.8; PVR = 0008 3203

755

C = HiP4DP

400

Notes:

1. See Section 7, “Package Description,” for more information on available package types.

2. The X prefix in a Freescale part number designates a “Pilot Production Prototype” as defined by Freescale SOP 3-13. These are from a limited

production volume of prototypes manufactured, tested, and Q.A. inspected on a qualified technology to simulate normal production. These

parts have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization from

the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product changes may still

occur while shipping pilot production prototypes

Table 21. Part Numbers Addressed by XPC755BxxnnnTx Series Part Number Specification (Document Order No.

MPC755BTXPNS/D)

XPC

755

B

xx

nnn

T

x

Product

Code

Part

Identifier

Process

Descriptor

Package

Processor

Frequency

Application Modifier

Revision Level

XPC

755

B = HiP4DP

RX = CBGA

350

400

T: 2.0 V ± 100 mV

–40° to 105°C

D: 2.7; PVR = 0008 3203

E: 2.8; PVR = 0008 3203