| поискавой системы для электроныых деталей |
|
PC87200 датащи(PDF) 12 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87200 датащи(HTML) 12 Page - National Semiconductor (TI) |
|
12 / 33 page ![]() 5.0 Pin Descriptions (Continued) 12 www.national.com 5.3.4 ISA Bus Interface Signals Signal Name Pin No. Type Description MASTER# 61 I ISA Master Mode: Master The MASTER# input asserted indicates an ISA bus master is driving the ISA bus and that it may access any device on the system board. SA[23:0] 33,32, 31,30, 4,3,160, 159,158, 157,156, 155,154, 153,152, 149,148, 147,146, 145,144, 143,142, 141 I/O System Address Bus This bus carries the addresses for all ISA cycles. SD[15:0] 56,55, 54,53, 50,49, 48,47, 9,10, 11,12, 15,16, 17,18 I/O System Data Bus This bus carries the data for all ISA cycles. SMEMW# 24 O System Memory Write SMEMW# is output on this pin. SMEMW# is asserted for any memory write ac- cesses below 1MB. It enables 8-bit memory slaves to decode the memory ad- dress on SA[19:0]. SMEMR# 22 O System Memory Read SMEMR# is output on this pin. SMEMR# is asserted for memory read accesses below 1MB. It enables 8-bit memory slaves to decode the memory address on SA[19:0]. SBHE# 62 I/O System Bus High Enable The PC87200 or ISA master asserts SBHE# to indicate that SD[15:8] will be used to transfer a byte at an odd address. SBHE# is an output during non-ISA master DMA operations. It is driven as the inversion of AD0 during 8-bit DMA cycles. It is forced low for all 16-bit DMA cy- cles. SBHE# is an input during ISA master operations. BALE 27 I/O Buffered Address Latch Enable/Special Test mode BALE indicates when SA[23:0] and SBHE# are valid and may be latched. This pin will be used as strap for special test mode with the PROHIBIT signal by checking its input level during reset. IOCHRDY 21 I/O OD I/O Channel Ready IOCHRDY deasserted indicates that an ISA slave requires additional wait states. When the PC87200 is an ISA slave, IOCHRDY is an output indicating additional wait states are required. REFRESH# 14 I/O OD Refresh Cycle indicator The PC87200 supports the standard ISA refresh function. When the ISA bus is not in use by the ISA bus controller, the DMA controller, or an ISA bus master, the refresh control logic will generate an ISA refresh cycle. The 87200 also sup- ports refresh requests initiated by ISA masters. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |