For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

978-250-3343 tel • 978-250-3373 fax • Order On-line at www.hittite.com

Application Support: apps@hittite.com

0

0 - 26

HMC700LP4 / 700LP4E

v11.0411

8 GHz 16-Bit Fractional-N PLL

Outline Drawing

Part number

Package Body Material

Lead Finish

MSL rating

HMc700LP4

Low Stress injection Molded Plastic

Sn/Pb Solder

MSL1

[1]

H700

XXXX

HMc700LP4(E)

roHS-compliant Low Stress injection Molded Plastic

100% matte Sn

MSL1

[2]

H700

XXXX

[1] Max peak reflow temperature of 235 °c

[2] Max peak reflow temperature of 260 °c

[3] 4-Digit lot number XXXX

Package Information

notES:

1. LEaDFraME MatEriaL: coPPEr aLLoY

2. DiMEnSionS arE in incHES [MiLLiMEtErS].

3. LEaD SPacinG toLErancE iS non-cUMULatiVE

4. PaD BUrr LEnGtH SHaLL BE 0.15mm MaXiMUM.

PaD BUrr HEiGHt SHaLL BE 0.05mm MaXiMUM.

5. PacKaGE WarP SHaLL not EXcEED 0.05mm.

6. aLL GroUnD LEaDS anD GroUnD PaDDLE MUSt

BE SoLDErED to PcB rF GroUnD.

7. rEFEr to HittitE aPPLication notE For SUGGEStED

PcB LanD PattErn.

Evaluation PCB

Please reference HMc700LP4 Product note for information on Evaluation PcB kit and List of Materials.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D