| поискавой системы для электроныых деталей |
|
DS3134 датащи(PDF) 128 Page - Dallas Semiconductor |
|
|
|||||||||||||||||||||||||||||
DS3134 датащи(HTML) 128 Page - Dallas Semiconductor |
|
128 / 203 page ![]() DS3134 128 of 203 forcing the CHEN bit to a one. The DMA will not re-enable the channel until it has finished writing all of the previously queued descriptors to the Done Queue. Then the Host can collect the errored descriptors as they arrive in the Done Queue and then re-queue them for transmission by writing descriptors to the Pending Queue so the transmit DMA knows where to find the packets that did not get transmitted (software housekeeping note: the Host must set the Next Pending Descriptor Pointer and PV fields in the Packet Descriptor to zero to ready them for transmission). The second option allows the software a cleaner error recovery technique. See Figure 8.2.1E for more details. Transmit DMA Error Recovery Algorithm Figure 8.2.1E Host Actions The Host will typically handle the Transmit DMA as follows: 1. The Host will place readied packets into the Pending Queue. 2. The Host will either poll or be interrupted that some outgoing packets have completed transmission and that it should read the Done Queue. 3. If Done Queue reports that an error was incurred and that a packet was not transmitted, then the Host must re-queue the packet for transmission. Transmit DMA Actions A typical scenario for the Transmit DMA is as follows: 1. The transmit DMA constantly reads the Pending Queue looking for packets that are queued for transmission. 2. The transmit DMA will update the Done Queue as packets or data buffers complete transmission. 3. If an error occurs, then the transmit DMA will disable the channel and wait for the Host to request that the channel be enabled. Read Done Queue Status = 1xx? No Data Buffers & Packet Descriptor Space Available for Reuse Yes Set CHRST = 1 for the Next Descriptor Written to the Pending Queue Set the PV & the Next Pending Descriptor Pointer Fields to zero in the Errored Packet Descriptor Place the Errored Packet Descriptor back into the Pending Queue for Re-transmission dmaerror |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |