| поискавой системы для электроныых деталей |
|
WM8993 датащи(PDF) 98 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8993 датащи(HTML) 98 Page - Wolfson Microelectronics plc |
|
98 / 229 page ![]() WM8993 Production Data w PD, November 2010, Rev 4.0 98 GENERAL PURPOSE INPUT/OUTPUT The WM8993 provides a number of GPIO functions to enable interfacing and detection of external hardware and to provide logic outputs to other devices. The input functions can be polled directly or can be used to generate an Interrupt (IRQ) event. The GPIO and Interrupt circuits support the following functions: Button detect (digital input) Accessory detection (MICBIAS current detection) Clock output (CLK_SYS divided by OPCLK_DIV) FLL Lock status output Temperature sensor output Control Write Sequencer status Logic ‘1’ and logic ‘0’ output Interrupt event (IRQ) output GPIO1 CONTROL The function of the GPIO1 pin can be selected using the GPIO1_SEL field. The available functions are described individually in the subsequent sections. Internal pull-up and pull-down resistors can be enabled for interfacing with external signal sources or push-buttons. GPIO1 may be configured as an input. In this configuration, the GPIO1 is an input to the Interrupt function, with selectable de-bounce and polarity control. The associated interrupt bit is latched once set and can be polled at any time or used to generate Interrupt events. See “Interrupts” for more details of the Interrupt event handling. The interrupt bit is latched once set; it is reset by writing a logic ‘1’ to the GPIO1_EINT register bit. De-bouncing is provided in order to avoid false event triggers. Note that TOCLK must be enabled when this input de-bouncing is required. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R18 (12h) GPIO CTRL 1 0 GPIO1_EIN T 0 GPIO1 interrupt 0 = interrupt not set 1 = interrupt is set Cleared when a ‘1’ is written R19 (13h) GPIO 1 5 GPIO1_PU 0 GPIO1 pull-up resistor enable 0 = pull-up disabled 1 = pull-up enabled 4 GPIO1_PD 1 GPIO1 pull-down resistor enable 0 = pull-down disabled 1 = pull-down enabled |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |