MPC7457 datasheet(5/71 Pages) FREESCALE

5 / 71 page

Features

MPC7457 RISC Microprocessor Hardware Specifications, Rev. 8

Freescale Semiconductor

— Four integer units (IUs) that share 32 GPRs for integer operands

– Three identical IUs (IU1a, IU1b, and IU1c) can execute all integer instructions except

multiply, divide, and move to/from special-purpose register instructions

– IU2 executes miscellaneous instructions including the CR logical operations, integer

multiplication and division instructions, and move to/from special-purpose register

instructions

— Five-stage FPU and a 32-entry FPR file

– Fully IEEE 754-1985 compliant FPU for both single- and double-precision operations

– Supports non-IEEE mode for time-critical operations

– Hardware support for denormalized numbers

– Thirty-two 64-bit FPRs for single- or double-precision operands

— Four vector units and 32-entry vector register file (VRs)

– Vector permute unit (VPU)

– Vector integer unit 1 (VIU1) handles short-latency AltiVec™ integer instructions, such as

vector add instructions (for example, vaddsbs, vaddshs, and vaddsws)

– Vector integer unit 2 (VIU2) handles longer-latency AltiVec integer instructions, such as

vector multiply add instructions (for example, vmhaddshs, vmhraddshs, and

vmladduhm)

– Vector floating-point unit (VFPU)

— Three-stage load/store unit (LSU)

– Supports integer, floating-point, and vector instruction load/store traffic

– Four-entry vector touch queue (VTQ) supports all four architected AltiVec data stream

operations

– Three-cycle GPR and AltiVec load latency (byte, half-word, word, vector) with one-cycle

throughput

– Four-cycle FPR load latency (single, double) with one-cycle throughput

– No additional delay for misaligned access within double-word boundary

– Dedicated adder calculates effective addresses (EAs)

– Supports store gathering

– Performs alignment, normalization, and precision conversion for floating-point data

– Executes cache control and TLB instructions

– Performs alignment, zero padding, and sign extension for integer data

– Supports hits under misses (multiple outstanding misses)

– Supports both big- and little-endian modes, including misaligned little-endian accesses

•

Three issue queues FIQ, VIQ, and GIQ can accept as many as one, two, and three instructions,

respectively, in a cycle. Instruction dispatch requires the following:

— Instructions can be dispatched only from the three lowest IQ entries—IQ0, IQ1, and IQ2

— A maximum of three instructions can be dispatched to the issue queues per clock cycle

MPC7457 датащи(PDF) 5 Page - Freescale Semiconductor, Inc

MPC7457 датащи(HTML) 5 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

датащи скачать

ссылки URL